TMS320C6747CZKBT3 Datasheet, PDF (66/227 Pages) Texas Instruments – TMS320C6745,TMS320C6747 Fixed/Floating-Point Digital Signal Processor

TMS320C6745, TMS320C6747
SPRS377E – SEPTEMBER 2008 – REVISED FEBRUARY 2013
www.ti.com
5.4 Unused USB0 (USB2.0) and USB1 (USB1.1) Pin Configurations
If one or both USB modules on the device are not used, then some of the power supplies to those
modules may not be required. This can eliminate the requirement for a 1.8V power supply to the USB
modules. The required pin configurations for unused USB modules are shown below.
Table 5-1. Unused USB0 and USB1 Pin Configurations
SIGNAL NAME
USB0_DM
USB0_DP
USB0_VDDA33
USB0_VDDA18
USB0_ID
USB0_VBUS
USB0_DRVVBUS/GP4[15]
USB0_VDDA12
USB1_DM
USB1_DP
USB1_VDDA33
USB1_VDDA18
AHCLKX0/AHCLKX2/USB_REFCLKIN/
GP2[11]
Configuration
(When USB0 and USB1 are not used)
No connect
No connect
No connect
No connect
No connect
No connect
No connect or use as alternate function
No connect
No connect
No connect
No connect
No connect
No connect or use as alternate function
Configuration
(When USB0 is used
and USB1 is not used)
Use as USB0 function
Use as USB0 function
3.3V
1.8V
Use as USB0 function
Use as USB0 function
Use as USB0 or alternate function
Internal USB0 PHY output connected to an
external filter capacitor
VSS
VSS
No connect
No connect
Use as USB0 or alternate function
66
Peripheral Information and Electrical Specifications
Copyright © 2008–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320C6745 TMS320C6747