TMS320C6747CZKBT3 Datasheet, PDF (188/227 Pages) Texas Instruments – TMS320C6745,TMS320C6747 Fixed/Floating-Point Digital Signal Processor

TMS320C6745, TMS320C6747
SPRS377E – SEPTEMBER 2008 – REVISED FEBRUARY 2013
www.ti.com
Table 5-96. Universal Serial Bus OTG (USB0) Registers (continued)
BYTE ADDRESS
0x01E0 0496
0x01E0 0497
0x01E0 0498
0x01E0 049A
0x01E0 049B
0x01E0 049C
0x01E0 049E
0x01E0 049F
0x01E0 04A0
0x01E0 04A2
0x01E0 04A3
0x01E0 04A4
0x01E0 04A6
0x01E0 04A7
0x01E0 0502
0x01E0 0508
0x01E0 050A
0x01E0 050B
0x01E0 050F
0x01E0 0510
0x01E0 0512
0x01E0 0514
ACRONYM
REGISTER DESCRIPTION
RXHUBADDR
Address of the hub that has to be accessed through the associated
Receive Endpoint. This is used only when full speed or low speed
device is connected via a USB2.0 high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated Receive
Endpoint. This is used only when full speed or low speed device is
connected via a USB2.0 high-speed hub.
TARGET ENDPOINT 3 CONTROL REGISTERS, VALID ONLY IN HOST MODE
TXFUNCADDR
Address of the target function that has to be accessed through the
associated Transmit Endpoint.
TXHUBADDR
Address of the hub that has to be accessed through the associated
Transmit Endpoint. This is used only when full speed or low speed
device is connected via a USB2.0 high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated
Transmit Endpoint. This is used only when full speed or low speed
device is connected via a USB2.0 high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the
associated Receive Endpoint.
RXHUBADDR
Address of the hub that has to be accessed through the associated
Receive Endpoint. This is used only when full speed or low speed
device is connected via a USB2.0 high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated Receive
Endpoint. This is used only when full speed or low speed device is
connected via a USB2.0 high-speed hub.
TARGET ENDPOINT 4 CONTROL REGISTERS, VALID ONLY IN HOST MODE
TXFUNCADDR
Address of the target function that has to be accessed through the
associated Transmit Endpoint.
TXHUBADDR
Address of the hub that has to be accessed through the associated
Transmit Endpoint. This is used only when full speed or low speed
device is connected via a USB2.0 high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated
Transmit Endpoint. This is used only when full speed or low speed
device is connected via a USB2.0 high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the
associated Receive Endpoint.
RXHUBADDR
Address of the hub that has to be accessed through the associated
Receive Endpoint. This is used only when full speed or low speed
device is connected via a USB2.0 high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated Receive
Endpoint. This is used only when full speed or low speed device is
connected via a USB2.0 high-speed hub.
CONTROL AND STATUS REGISTER FOR ENDPOINT 0
PERI_CSR0
Control Status Register for Endpoint 0 in Peripheral Mode
HOST_CSR0
Control Status Register for Endpoint 0 in Host Mode
COUNT0
Number of Received Bytes in Endpoint 0 FIFO
HOST_TYPE0
Defines the Speed of Endpoint 0
HOST_NAKLIMIT0
Sets the NAK Response Timeout on Endpoint 0
CONFIGDATA
Returns details of core configuration.
CONTROL AND STATUS REGISTER FOR ENDPOINT 1
TXMAXP
Maximum Packet Size for Peripheral/Host Transmit Endpoint
PERI_TXCSR
Control Status Register for Peripheral Transmit Endpoint
(peripheral mode)
HOST_TXCSR
Control Status Register for Host Transmit Endpoint
(host mode)
RXMAXP
Maximum Packet Size for Peripheral/Host Receive Endpoint
188 Peripheral Information and Electrical Specifications
Copyright © 2008–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320C6745 TMS320C6747