AMC7812 Datasheet, PDF (51/92 Pages) Texas Instruments – 12-Bit ANALOG MONITORING AND CONTROL SOLUTION with Multichannel ADC, DACs, and Temperature Sensors

AMC7812
www.ti.com
SBAS513D – JANUARY 2011 – REVISED OCTOBER 2012
Writing a Single Word of Data to a 16-Bit Register (Figure 100)
1. The master device asserts a start condition.
2. The master then sends the 7-bit AMC7812 slave address followed by a zero for the direction bit, indicating a
write operation.
3. The AMC7812 asserts an acknowledge signal on SDA.
4. The master sends a register address.
5. The AMC7812 asserts an acknowledge signal on SDA.
6. The master sends a data byte of the high byte of the register (D15:D8).
7. The AMC7812 asserts an acknowledge signal on SDA.
8. The master sends a data byte of the low byte of the register (D7:D0).
9. The AMC7812 asserts an acknowledge signal on SDA.
10. The master asserts a stop condition to end the transaction.
S
AMC7812
Slave Address
0A
Register Pointer
(Register Address)
A
High Byte to
AMC7812 Register
A
Low Byte to
AMC7812 Register
AP
From Master to Slave
From Slave to Master
A = Acknowledge
N = Not Acknowledge
S = START Condition
P = Stop Condition
Sr = Repeated START Condition
Figure 100. Write Single Byte
Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Links: AMC7812
Submit Documentation Feedback
51