CC3200_15 Datasheet, PDF (32/71 Pages) Texas Instruments – CC3200 SimpleLink™ Wi-Fi® and Internet-of-Things Solution, a Single-Chip Wireless MCU

CC3200
SWAS032F – JULY 2013 – REVISED FEBRUARY 2015
www.ti.com
Current Consumption (continued)
T_A = +25°C, V_BAT = 3.6 V
PARAMETER
TEST CONDITIONS^{(1) (2)}
MIN TYP MAX UNIT
TX power level = 0
275
1 DSSS
TX power level = 4
191
MCU SLEEP
TX
NWP ACTIVE
TX power level = 0
251
6 OFDM
TX power level = 4
182
TX power level = 0
226
mA
54 OFDM
TX power level = 4
163
RX
NWP idle connected⁽³⁾
1 DSSS
54 OFDM
56
56
12.2
TX power level = 0
272
1 DSSS
TX power level = 4
188
TX
NWP active
MCU LPDS
TX power level = 0
248
6 OFDM
TX power level = 4
179
TX power level = 0
223
54 OFDM
mA
TX power level = 4
160
MCU hibernate⁽⁵⁾
RX
NWP LPDS⁽⁴⁾
NWP idle connected⁽³⁾
NWP hibernate⁽⁶⁾
1 DSSS
54 OFDM
53
53
0.25
0.825
4
µA
Peak calibration current ⁽⁷⁾
V_BAT = 3.3 V
V_BAT = 2.1 V
V_BAT = 1.85 V
450
670
mA
700
(4) LPDS current does not include the external serial flash. The LPDS number reported is with retention of 64KB MCU SRAM. The CC3200
device can be configured to retain 0KB, 64KB, 128KB, 192KB or 256KB SRAM in LPDS. Each 64KB retained increases LPDS current
by 4 µA.
(5) For the 1.85-V mode, the Hibernate current is higher by 50 µA across all operating modes because of leakage into the PA and analog
power inputs.
(6) Serial flash current consumption in power-down mode during hibernate is not included.
(7) The complete calibration can take up to 17 mJ of energy from the battery over a time of 24 ms . Calibration is performed sparingly,
typically when coming out of Hibernate and only if temperature has changed by more than 20°C or the time elapsed from prior
calibration is greater than 24 hours.
32
Specifications
Submit Documentation Feedback
Product Folder Links: CC3200
Copyright © 2013–2015, Texas Instruments Incorporated