English
Language : 

MSP430FG47X Datasheet, PDF (17/91 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER
MSP430FG47x
MIXED SIGNAL MICROCONTROLLER
SLAS580D -- OCTOBER 2008 -- REVISED MARCH 2011
watchdog timer (WDT+)
The primary function of the WDT+ module is to perform a controlled system restart after a software problem
occurs. If the selected time interval expires, a system reset is generated. If the watchdog function is not needed
in an application, the module can be configured as an interval timer and can generate interrupts at selected time
intervals.
Basic Timer1 and Real-Time Clock
The Basic Timer1 has two independent 8-bit timers that can be cascaded to form a 16-bit timer/counter. Both
timers can be read and written by software. The Basic Timer1 is extended to provide an integrated real-time
clock (RTC). An internal calendar compensates for month with less than 31 days and includes leap year
correction.
LCD_A driver with regulated charge pump
The LCD_A driver generates the segment and common signals required to drive an LCD display. The LCD_A
controller has dedicated data memory to hold segment drive information. Common and segment signals are
generated as defined by the mode. Static, 2-MUX, 3-MUX, and 4-MUX LCDs are supported by this peripheral.
The module can provide a LCD voltage independent of the supply voltage via an integrated charge pump.
Furthermore, it is possible to control the level of the LCD voltage and, thus, contrast in software.
Timer_A3
Timer_A3 is a 16-bit timer/counter with three capture/compare registers. Timer_A3 can support multiple
capture/compares, PWM outputs, and interval timing. Timer_A3 also has extensive interrupt capabilities.
Interrupts may be generated from the counter on overflow conditions and from each of the capture/compare
registers.
INPUT PIN NUMBER
PN
P1.5 -- 51
ZQW
F11
P1.5 -- 51
F11
P1.0 -- 58
C11
P1.1 -- 57
C12
P1.2 -- 56
D11
P2.0 -- 4
C2
TIMER_A3 SIGNAL CONNECTIONS
DEVICE INPUT MODULE INPUT
SIGNAL
NAME
MODULE
BLOCK
TACLK
ACLK
SMCLK
TAINCLK
TA0
TA0
DVSS
DVCC
TA1
CAOUT (internal)
DVSS
DVCC
TA2
ACLK (internal)
DVSS
DVCC
TACLK
ACLK
SMCLK
INCLK
CCI0A
CCI0B
GND
VCC
CCI1A
CCI1B
GND
VCC
CCI2A
CCI2B
GND
VCC
Timer
CCR0
CCR1
CCR2
MODULE
OUTPUT
SIGNAL
NA
TA0
TA1
TA2
OUTPUT PIN NUMBER
PN
ZQW
P1.0 -- 58
C11
P1.1 -- 57
C12
P1.2 -- 56
D11
P2.0 -- 4
C2
 POST OFFICE BOX 655303 DALLAS, TEXAS 75265
17