BQ24292I Datasheet, PDF (10/42 Pages) Texas Instruments – I2C Controlled 4.5A Single Cell USB/Adapter Charger With Narrow VDC Power Path Management and USB OTG

bq24292i
SLUSBI4 – APRIL 2013
www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
V_{VBUS_UVLOZ} < V_VBUS < V_ACOV and V_VBUS > V_BAT + V_SLEEP, T_J = –40°C to 125°C and T_J = 25°C for typical values unless other
noted.
PARAMETER
TEST CONDITIONS
COLD/HOT THERMISTER COMPARATOR
V_LTF
Cold temperature threshold, TS pin voltage
rising threshold
Charger suspends charge. As Percentage to V_REGN
V_{LTF_HYS}
Cold temperature hysteresis, TS pin voltage
falling
As Percentage to V_REGN
V_HTF
Hot temperature TS pin voltage falling
threshold
As Percentage to V_REGN
V_TCO
Cut-off temperature TS pin voltage falling
threshold
As Percentage to V_REGN
Deglitch time for temperature out of range
detection
V_TS > V_LTF, or V_TS < V_TCO, or V_TS < V_HTF
CHARGE OVER-CURRENT COMPARATOR
I_{HSFET_OCP}
HSFET over-Current threshold
I_{BATFET_OCP}
System over load threshold
CHARGE UNDER-CURRENT COMPARATOR (CYCLE-BY-CYCLE)
V_{LSFET_UCP}
LSFET charge under-current falling
threshold
From sync mode to non-sync mode
PWM OPERATION
F_SW
D_MAX
V_{BTST_REFRESH}
PWM Switching frequency, and digital clock
Maximum PWM duty cycle
Bootstrap refresh comparator threshold
VBTST-VSW when LSFET refresh pulse is
requested, VBUS=5V
VBTST-VSW when LSFET refresh pulse is
requested, VBUS>6V
MIN TYP
73% 73.5%
0.2% 0.4%
46.6% 47.2%
44.2% 44.7%
10
5.3
7
9
100
1300
1500
97%
3.6
4.5
MAX UNITS
74%
0.6%
48.8%
45.2%
ms
A
A
mA
1700 kHz
V
10
Submit Documentation Feedback
Product Folder Links :bq24292i
Copyright © 2013, Texas Instruments Incorporated