DAC8564 Datasheet, PDF (1/46 Pages) Texas Instruments – 16-Bit, Quad Channel, Ultra-Low Glitch, Voltage Output DIGITAL-TO-ANALOG CONVERTER with 2.5V, 2ppm/°C Internal Reference

BurrĆBrown Products
DAC8564
from Texas Instruments
DAC8564
SBAS403A – JUNE 2007 – REVISED NOVEMBER 2007
16-Bit, Quad Channel, Ultra-Low Glitch, Voltage Output
DIGITAL-TO-ANALOG CONVERTER with 2.5V, 2ppm/°C Internal Reference
FEATURES
1
•234 Relative Accuracy: 4LSB
• Glitch Energy: 0.15nV-s
• Internal Reference:
– 2.5V Reference Voltage (enabled by default)
– 0.02% Initial Accuracy
– 2ppm/°C Temperature Drift (typ)
– 5ppm/°C Temperature Drift (max)
– 20mA Sink/Source Capability
• Power-On Reset to Zero-Scale
• Ultra-Low Power Operation: 1mA at 5V
• Wide Power Supply Range: +2.7V to +5.5V
• 16-Bit Monotonic Over Temperature Range
• Settling Time: 10µs to ±0.003% Full-Scale
Range (FSR)
• Low-Power Serial Interface with
Schmitt-Triggered Inputs
• On-Chip Output Buffer Amplifier with
Rail-to-Rail Operation
• Drop-In and Functionally Compatible with
DAC8534 and DAC8554
• Pin-Compatible with DAC8555 and DAC8565
• 1.8V to 5.5V Logic Compatibility
• Temperature Range: –40°C to +105°C
APPLICATIONS
• Portable Instrumentation
• Closed-Loop Servo-Control
• Process Control
• Data Acquisition Systems
• Programmable Attenuation
• PC Peripherals
DESCRIPTION
The DAC8564 is a low-power, voltage-output,
four-channel, 16-bit digital-to-analog converter (DAC).
The device includes a 2.5V, 2ppm/°C internal
reference (enabled by default), giving a full-scale
output voltage range of 2.5V. The internal reference
has an initial accuracy of 0.02% and can source up to
20mA at the V_REFH/V_REFOUT pin. The device is
monotonic, provides very good linearity, and
minimizes undesired code-to-code transient voltages
(glitch). The DAC8564 uses a versatile 3-wire serial
interface that operates at clock rates up to 50MHz.
The interface is compatible with standard SPI™,
QSPI™, Microwire™, and digital signal processor
(DSP) interfaces.
The DAC8564 incorporates a power-on-reset circuit
that ensures the DAC output powers up at zero-scale
and remains there until a valid code is written to the
device. The device contains a power-down feature,
accessed over the serial interface, that reduces the
current consumption of the device to 1.3µA at 5V.
The low-power consumption, internal reference, and
small footprint make this device ideal for portable,
battery-operated equipment. The power consumption
is 2.9mW at 3V, reducing to 1.5µW in power-down
mode.
The DAC8564 is drop-in and functionally compatible
with the DAC8534 and DAC8554, and pin-compatible
with DAC8555 and DAC8565. The DAC8564 is
available in a TSSOP-16 package.
AVDD
DAC8564
Data Buffer A
DAC Register A
16-Bit DAC
VOUTA
Data Buffer B
DAC Register B
16-Bit DAC
VOUTB
Data Buffer C
DAC Register C
16-Bit DAC
VOUTC
SYNC
SCLK
DIN
Data Buffer D
DAC Register D
16-Bit DAC
VOUTD
24-Bit Shift Register
Buffer
Control
Register
Control
Control Logic
GND
A0
A1
LDAC ENABLE
2.5V
Reference
Power-Down
Control Logic
VREF
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI, QSPI are trademarks of Motorola, Inc.
2
Microwire is a trademark of National Semiconductor.
3
All other trademarks are the property of their respective owners.
4
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated