|
CC2400 Datasheet, PDF (1/84 Pages) Texas Instruments – 2.4 GHz Low-Power RF Transceiver | |||
|
CC2400
CC2400
2.4 GHz Low-Power RF Transceiver
Applications
⢠2.4 GHz MHz ISM/SRD band systems
⢠Game controllers
⢠Sports and leisure equipment
⢠Wireless audio
⢠PC peripherals
⢠Advanced toys
Product Description
The CC2400 is a true single-chip 2.4 GHz
RF transceiver designed for low-power
and low-voltage wireless applications. The
RF transceiver is integrated with a
baseband modem supporting data rates
up to 1 Mbps.
The CC2400 is a low-cost, highly integrated
solution enabling robust wireless
communication in the 2.4 - 2.4835 GHz
unlicensed ISM band. It is intended for
systems compliant with world-wide
regulations covered by EN 300 440
(Europe), CFR47 Part 15 (US) and ARIB
STD-T66 (Japan).
and error detection reducing the workload
on the host microcontroller.
The main operating parameters of CC2400
can be programmed via an SPI-bus. In a
typical system CC2400 will be used
together with a microcontroller and a few
external, passive components.
CC2400 is based on Chipconâs SmartRF-
03 technology in 0.18 µm CMOS.
Targeting a wide range of applications at
2.4 GHz, the CC2400 supports over-the-air
data rates of 10 kbps, 250 kbps and
1 Mbps without requiring any modifications
to the hardware.
The CC2400 provides extensive hardware
support for packet handling, data
buffering, burst transmissions, data coding
Key Features
⢠True single-chip 2.4 GHz RF
transceiver with baseband modem
⢠10 kbps, 250 kbps and 1 Mbps over-
the-air data rates
⢠Low current consumption (RX: 24 mA)
⢠Low core supply voltage (1.8 V)
⢠Programmable output power
⢠No external RF switch / filter needed
⢠I/Q low-IF receiver
⢠I/Q direct up-conversion transmitter
⢠Few external components
⢠FIFO allows bursting of data
⢠Packet handling hardware
⢠Data buffering
⢠Digital RSSI output
⢠Small size (QFN 48 package), 7x7 mm
⢠Reference design complies with EN
300 328, EN 300 440, FCC CFR47 part
15 and ARIB STD-T66
⢠Powerful and flexible development
tools available
⢠Easy-to-use software for generating
the CC2400 configuration data
This document contains information on a pre-production product. Specifications and information herein are subject to
change without notice.
SWRS042A
Page 1 of 83
|
▷ |