THCV217_16 Datasheet, PDF (7/35 Pages) THine Electronics, Inc. – V-by-One HS High-speed Video Data Transmitter and Receiver

THCV218
THCV218 Pin Description
PIN Name
Ball #
Type*
Description
RX0n,RX0p
RX1n,RX1p
R19-R10
G19-G10
B19-B10
CONT11,12
R29-R20
G29-G20
F1,F2
H1,H2
A13,B12,B13,
C12,C13,D12,
D13,E12,E13,F13
A7,B8,A8,B9,
A9,B10,A10,
B11,A11,A12
A2,B3,A3,B4,
A4,B5,A5,
B6,A6,B7
C1,C2
M6,N6,M5,N5,
M4,N4,M3,
N3,M2,N2
M11,N11,M10,
N10,M9,N9,
M8,N8,M7,N7
CI CML input for Lane0
CI CML input for Lane1. Must be left OPEN when not used.
O3 1st pixel data outputs
O3 1st pixel data outputs
O3 1st pixel data outputs
O3 User defined data outputs. Active only in 10bit mode.
O3 2nd pixel data outputs
O3 2nd pixel data outputs
J12,J13,K12,
B29-B20
K13,L12,L13,
M12,M13,N12,N13
CONT21,22
H13,H12
DE
B1
VSYNC
B2
HSYNC
A1
CLKOUT
G13
HTPDN
D1
LOCKN
D2
O3 2nd pixel data outputs
O3
O3
O3
O3
O3
OD3
OD3
User defined data outputs. Active only in 10bit mode.
DE Output
Vsync Output
Hsync Output
Pixel clock output
Hot plug detect output.
Must be connected to Tx HTPDN with a 10kW pull-up resistor.
Hi-Z : when PDN=L, L: when PDN=H
Lock detect output.
Must be connected to Tx LOCKN with a 10kW pull-up resistor.
It drives Low when the CDR locks to the incoming data.
PDN
COL
BET
MODE1,0
Power down input
L1
I3 H: Normal operation
L: Power Down
Color depth select input
L3
I3 H: 8bit mode
L: 10bit mode
Field BET enable
J2
I3L
H: Enable
L: Normal Operation
When BET=High, Reserved7 must be Low.
Operation mode select input
HH: Reserved (Forbidden)
J1,K2
I3 HL: Single-in/Single-out
LH: Dual-in/Single-out
LL: Dual-in/Dual-out
*type symbol
CI=CML Input, OD3=3.3V Open drain output, O3=3.3V CMOS output
I3=3.3V CMOS input, I3L=Low speed 3.3V CMOS input, I3PU=3.3V CMOS inout with an on-chip pullup resistor
P=1.8v power supply, P3=3.3v power supply
THCV217-THCV218_Rev.2.11_E
7
Copyright(C)2016 THine Electronics,Inc.
THine Electronics, Inc.
Security E