THCV217_16 Datasheet, PDF (5/35 Pages) THine Electronics, Inc. – V-by-One HS High-speed Video Data Transmitter and Receiver

Pin Description
THCV217
THCV217 Pin Description
Name
Ball #
Type*
Description
TX0n,TX0p
E10,E11
CO CML output for Lane0
TX1n,TX1p
F10,F11
CO CML output for Lane1. Must be left OPEN when not used.
R19-R10
B8,A8,B9,A9,
B10,A10,B11,
A11,C10,C11
I3 1st pixel data inputs
G19-G10
B3,A3,B4,A4,
B5,A5,B6,
A6,B7,A7
I3 1st pixel data inputs
B19-B10
CONT11,12
E2,E1,D2,D1,
C2,C1,B2,
B1,A2,A1
D10,D11
I3 1st pixel data inputs
I3 User defined data inputs, serialized with 1st pixel data. Active only in 10bit mode.
R29-R20
K2,K1,J2,J1,
H2,H1,G2,
G1,F2,F1
I3 2nd pixel data inputs
G29-G20
K6,L6,K5,L5,
K4,L4,K3,
L3,L2,L1
I3 2nd pixel data inputs
B29-B20
CONT21,22
DE
HSYNC
VSYNC
CLKIN
HTPDN
H10,H11,K10,
L10,K9,L9,
K8,L8,K7,L7
G10,G11
J11
L11
K11
J10
C8
I3 2nd pixel data inputs
I3 User defined data inputs, serialized with 2nd pixel data. Active only in 10bit
I3 mDEodinep. ut
I3 Hsync input
I3 Vsync input
I3 Pixel clock input
I3L
Hot plug detect input.
Must be connected to Rx HTPDN with a 10kW pull-up resistor.
LOCKN
C9
I3L
Lock detect input.
Must be connected to Rx LOCKN with a 10kW pull-up resistor.
*type symbol
CO=CML Output
I3=3.3V CMOS input, I3L=Low speed 3.3V CMOS input
O3=3.3V CMOS output
P=1.8V power supply, P3=3.3V power supply
THCV217-THCV218_Rev.2.11_E
5
Copyright(C)2016 THine Electronics,Inc.
THine Electronics, Inc.
Security E