THCV215_16 Datasheet, PDF (11/26 Pages) THine Electronics, Inc. – V-by-One HS High-speed Video Data Transmitter and Receiver

THCV215 Pre-emphasis function (PRE [1:0])
Pre-emphasis can equalize severe signal degradation caused by long distance or high-speed transmission.
Two pins, PRE1 and PRE0, select the strength of pre-emphasis. See Table 4.
PRE[1:0]
L,L
H,L
L,H / H,H
Description
w/o Pre-emphasis
w/ 100% Pre-emphasis
Not available
Table 4. Pre-emphasis function table
THCV215 Power Down function (PDN)
By setting the PDN pin to low, it results in the power down mode. All the internal circuitry turns off and the
both TXn+/- (n=0, 1) outputs turn to VDL.
THCV216 Power Down function (PDN)
By setting the PDN pin to low, it results in the power down mode. All the internal circuitry turns off and the
RLXn+/- (X=A, B, C, D, E, F, CLK, n=0, 1) outputs turn to High-Z.
THCV215 Link Ready function (RDY)
This is a CMOS output for indicating the link status. RDY=High if link is ready.
THCV215-216_Rev.2.70_E
Copyright(C)2016 THine Electronics, Inc.
11/26
THine Electronics, Inc.
Security E