CGA3E2X7R2A103K080AA Datasheet, PDF (8/31 Pages) TDK Electronics – SPECIFICATION

(continued)
No.
Item
Performance
13 Vibration
External
No mechanical damage.
appearance
Capacitance
Characteristics
Change from the
value before test
Capacitance drift
Class1
C0G
within ± 2.5% or
± 0.25pF,
whichever larger.
X5R
Class2
X7R
X7S
X7T
± 7.5 %
Q
(Class1)
Capacitance
Q
30pF and over 1,000 min.
Under 30pF 400+20×C min.
C : Rated capacitance (pF)
D.F.
(Class2)
Meet the initial spec.
14 Temperature External
No mechanical damage.
cycle
appearance
Capacitance
Characteristics
Change from the
value before test
Capacitance drift
Class1
C0G
within ± 2.5% or
± 0.25pF,
whichever larger.
X5R
Class2
X7R
X7S
± 7.5 %
X7T
Q
(Class1)
Capacitance
30pF and over
Q
1,000 min.
Under 30pF
400+20×C min.
C : Rated capacitance (pF)
D.F.
(Class2)
Insulation
Resistance
Voltage
proof
Meet the initial spec.
Meet the initial spec.
No insulation breakdown or
other damage.
Test or inspection method
Reflow solder the capacitors on a
P.C.Board shown in Appendix1 before
testing.
Vibrate the capacitor with following
conditions.
Applied force : 5G max.
Frequency : 10-2000Hz
Duration : 20 min.
Cycle : 12 cycles in each 3 mutually
perpendicular directions.
Reflow solder the capacitors on a
P.C.Board shown in Appendix 1a or
Appendix 1b before testing.
Expose the capacitors in the condition
step1 through step 4 and repeat 1,000
times consecutively.
Leave the capacitors in ambient
condition for 6 to 24h (Class 1) or
24±2h (Class 2) before measurement.
Step Temperature(°C)
1
Min. operating
temp. ±3
Time (min.)
30 ± 3
2 Reference Temp. ±2
3
Max. operating
temp. ±2
4 Reference Temp. ±2
2-5
30 ± 2
2-5
—7—