CGA3E2X7R2A103K080AA Datasheet, PDF (6/31 Pages) TDK Electronics – SPECIFICATION

(continued)
No.
Item
8 Temperature
Characteristics
of Capacitance
(Class2)
9 Robustness of
Terminations
10 Bending
Performance
Capacitance Change (%)
No voltage applied
X5R : ± 15
X7R : ± 15
X7S : ± 22
X7T :
+22
-33
No sign of termination coming
off, breakage of ceramic, or
other abnormal signs.
Test or inspection method
Capacitance shall be measured by the
steps shown in the following table after
thermal equilibrium is obtained for each
step.
∆C be calculated ref. STEP3 reading
Step
Temperature(°C)
1
Reference temp. ± 2
2
Min. operating temp. ± 3
3
Reference temp. ± 2
4 Max. operating temp. ± 2
Measuring voltage : 0.1, 0.2, 0.5, 1.0Vrms.
For information which product has which
Measuring voltage, please contact with our
sales representative.
Reflow solder the capacitors on a
P.C.Board shown in Appendix 1a or
Appendix 1b and apply a pushing force of
17.7N with 10±1s.
(2N is applied for CGA1, CGA2 type)
No mechanical damage.
Pushing force
P.C.Board
Capacitor
Reflow solder the capacitors on
a P.C.Board shown in Appendix 2a or
Appendix 2b and bend it for 2mm. (1mm
is applied for 0.85mm thickness of Class2
items.)
20
50
F
R230
2
45
45
(Unit : mm)
—5—