LSM303DLM Datasheet, PDF (32/38 Pages) STMicroelectronics – Sensor module:3-axis accelerometer and 3-axis magnetometer

Register description
LSM303DLM
9.1.17 INT2_SRC_A (35h)
Table 48. INT2_SRC_A register
0
IA
ZH
ZL
YH
YL
XH
XL
Table 49. INT2_SRC_A description
Interrupt active. Default value: 0
IA
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
Z high. Default value: 0
ZH
(0: no interrupt, 1: Z high event has occurred)
Z low. Default value: 0
ZL
(0: no interrupt; 1: Z low event has occurred)
Y high. Default value: 0
YH
(0: no interrupt, 1: Y high event has occurred)
Y low. Default value: 0
YL
(0: no interrupt, 1: Y low event has occurred)
X high. Default value: 0
XH
(0: no interrupt, 1: X high event has occurred)
X Low. Default value: 0
XL
(0: no interrupt, 1: X low event has occurred)
9.1.18
Interrupt 2 source register. Read-only register.
Reading at this address clears the INT2_SRC_A IA bit (and the interrupt signal on the INT 2
pin) and allows the refreshing of data in the INT2_SRC_A register if the latched option was
chosen.
INT2_THS_A (36h)
Table 50. INT2_THS register
0
THS6
THS5
THS4
THS3
THS2
THS1
THS0
Table 51. INT2_THS description
THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000
9.1.19 INT2_DURATION_A (37h)
Table 52. INT2_DURATION_A register
0
D6
D5
D4
D3
D2
D1
D0
32/38
Doc ID 018725 Rev 1