LSM303DLM Datasheet, PDF (29/38 Pages) STMicroelectronics – Sensor module:3-axis accelerometer and 3-axis magnetometer

LSM303DLM
Register description
Table 37.
AOI
6D
ZHIE
ZLIE
YHIE
YLIE
XHIE
XLIE
INT1_CFG_A description
AND/OR combination of interrupt events. Default value: 0
(see Table 38).
6-direction detection function enable. Default value: 0
(see Table 38).
Enable interrupt generation on Z high event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Z low event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on Y high event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Y low event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on X high event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on X low event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value lower than preset threshold)
Configuration register for Interrupt 1 source.
Table 38. Interrupt 1 source configurations
AOI
6D
Interrupt mode
0
0
OR combination of interrupt events
0
1
6-direction movement recognition
1
0
AND combination of interrupt events
1
1
6-direction position recognition
9.1.13 INT1_SRC_A (31h)
Table 39. INT1_SRC register
0
IA
ZH
ZL
YH
YL
XH
XL
Doc ID 018725 Rev 1
29/38