LSM303DLM Datasheet, PDF (31/38 Pages) STMicroelectronics – Sensor module:3-axis accelerometer and 3-axis magnetometer

LSM303DLM
9.1.16 INT2_CFG_A (34h)
Table 45. INT2_CFG_A register
AOI
6D
ZHIE
ZLIE
YHIE
Register description
YLIE
XHIE
XLIE
Table 46.
AOI
6D
ZHIE
ZLIE
YHIE
YLIE
XHIE
XLIE
INT2_CFG_A description
AND/OR combination of interrupt events. Default value: 0
(see Table 47).
6-direction detection function enable. Default value: 0
(see Table 47).
Enable interrupt generation on Z high event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Z low event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on Y high event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Y low event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on X high event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on X low event. Default value: 0
(0: disable interrupt request,
1: enable interrupt request on measured accel. value lower than preset threshold)
Configuration register for Interrupt 2 source.
Table 47. Interrupt mode configuration
AOI
6D
0
0
0
1
1
0
1
1
Interrupt mode
OR combination of interrupt events
6-direction movement recognition
AND combination of interrupt events
6-direction position recognition
Doc ID 018725 Rev 1
31/38