LAN9218 Datasheet, PDF (86/130 Pages) SMSC Corporation – High-Performance Single- Chip 10/100 Ethernet Controller with HP Auto-MDIX

5.3.18
High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
Datasheet
FREE_RUN—Free-Run 25MHz Counter
Offset:
9Ch
Size:
32 bits
This register reflects the value of the free-running 25MHz counter.
BITS
DESCRIPTION
31:0 Free Running SCLK Counter (FR_CNT):
Note:
Note:
This field reflects the value of a free-running 32-bit counter. At reset
the counter starts at zero and is incremented for every 25MHz
cycle. When the maximum count has been reached the counter will
rollover. When read in 16-bit mode the count value is latched on
the first read. The FREE_RUN counter can take up to 160nS to
clear after a reset event.
This counter will run regardless of the power management states
D0, D1 or D2.
TYPE
RO
DEFAULT
-
5.3.19 RX_DROP– Receiver Dropped Frames Counter
Offset:
A0h
Size:
32 bits
This register indicates the number of receive frames that have been dropped.
BITS
DESCRIPTION
31-0
RX Dropped Frame Counter (RX_DFC). This counter is incremented every
time a receive frame is dropped. RX_DFC is cleared on any read of this
register.
An interrupt can be issued when this counter passes through its halfway
point (7FFFFFFFh to 80000000h).
TYPE
RC
DEFAULT
00000000h
Revision 1.5 (07-18-06)
86
DATASHEET
SMSC LAN9218