LAN9218 Datasheet, PDF (42/130 Pages) SMSC Corporation – High-Performance Single- Chip 10/100 Ethernet Controller with HP Auto-MDIX

High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
Datasheet
init
Last Buffer in
Packet
Idle
Check
available
FIFO
space
TX Status
Available
Read TX
Status
(optional)
Write
TX
Command
Write
Start
Padding
(optional)
Write
Buffer
Not Last Buffer
Figure 3.11 Simplified Host TX Flow Diagram
3.13.1
TX Buffer Format
TX buffers exist in the host’s memory in a given format. The host writes a TX command word into the
TX data buffer before moving the Ethernet packet data. The TX command A and command B are 32-
bit values that are used by the LAN9218 in the handling and processing of the associated Ethernet
packet data buffer. Buffer alignment, segmentation and other packet processing parameters are
included in the command structure. The following diagram illustrates the buffer format.
Revision 1.5 (07-18-06)
42
DATASHEET
SMSC LAN9218