SKY65362-11 Datasheet, PDF (7/13 Pages) Skyworks Solutions Inc. – 900 to 930 MHz High-Power RF Front-End Module

DATA SHEET • SKY65362-11: HIGH-POWER RF FEM
Table 9. SKY65362-11 Mode Control Logic (Note 1)
Mode
CPS
(Pin 6)
Sleep (all off)
0
Receive bypass
0
Receive LNA mode
1
Transmit
X
ANT1 port enabled
X
ANT2 port enabled
X
Note 1: “1” = 1.6 to 3.6 V, “0” = 0 to 0.3 V, “X” = don’t care.
CSD
(Pin 5)
0
1
1
1
X
X
CTX
(Pin 7)
0
0
0
1
X
X
ANT_SEL
(Pin 9)
X
X
X
X
0
1
Evaluation Board Description
The SKY65362-11 Evaluation Board is used to test the
performance of the SKY65362-11 FEM. An Evaluation Board
schematic diagram is provided in Figure 3. An assembly drawing
for the Evaluation Board is shown in Figure 4.
Package Dimensions
The PCB layout footprint for the SKY65362-11 is provided in
Figure 5. Figure 6 shows the package dimensions for the 36-pin
MCM, and Figure 7 provides the tape and reel dimensions.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
The SKY65362-11 is rated to Moisture Sensitivity Level 3 (MSL3)
at 260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design and SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202886B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 9, 2015
7