English
Language : 

SKY65362-11 Datasheet, PDF (5/13 Pages) Skyworks Solutions Inc. – 900 to 930 MHz High-Power RF Front-End Module
DATA SHEET • SKY65362-11: HIGH-POWER RF FEM
Table 6. SKY65362-11 Transmit Mode Electrical Specifications (1 of 2) (Note 1)
(VCC = +5.0 V, TA = +25 C, as Measured on the SKY65362-11 Evaluation Board [De-Embedded to Device], All Unused Ports Terminated
with 50 Ω, Input Port = PA_IN, Outport Port = ANT1, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
Frequency range
f
900
930
MHz
Output power @ ANT1 port
POUT
900 to 930 MHz with specified
matching network on EVB, CW,
PIN = 0 dBm:
VCC = 5.0 V
VCC = 4.0 V
VCC = 3.6 V
+30.5
dBm
+28
dBm
+26
dBm
PA power added efficiency
PAE
POUT = +30.5 dBm @ ANT1
port, 915 MHz
43
%
Input return loss
S11_TX
902 to 928 MHz
–10
dB
Small signal gain
S21_900
902 to 928 MHz
33
dB
Output return loss
S22_TX
900 to 930 MHz, into 50 Ω,
ANT1 and ANT2 ports
–10
dB
2nd, 6th, 7th, and 10th harmonics (HD 2, 6, 7,
and 10)
2fo, 6fo, 7fo,
10fo
900 to 930 MHz with specified
matching network on EVB, CW,
POUT = +30.5 dBm @ ANT1 port
(Note 2)
–35
–30
dBc
3rd, 4th, 5th, 8th, and 9th harmonic (HD 3, 4, 5, 3fo, 4fo, 5fo,
8, and 9)
8fo, 9fo
900 to 930 MHz with specified
matching network on EVB, CW,
POUT = +30.5 dBm @ ANT1 port
(Note 2)
–50
–45
dBc
Non-harmonic spurious
Spurious
POUT = +30.5 dBm @ ANT1
port, resolution bandwidth =
100 kHz, CW (Note 3)
–55
–50
dBm
Change in output power under VSWR
POUT_VSWR VSWR = 2.5:1, CW, reference
POUT = +30.5 dBm into 50 Ω
(Note 3)
–3
+1.5
dB
Turn-on/off time
tON_TX,
tOFF_TX
“Off” to transmit or transmit to
“off,” from 50% of CTX edge to
90% of final RF output power
(Note 3)
11
μs
Mode change time
tMODE_CHANGE
Transmit to receive or receive
bypass, receive or receive
bypass to transmit, from 50% of
CTX edge to 10% of final RF
output power (Note 3)
11
μs
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202886B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 9, 2015
5