SKY65362-11 Datasheet, PDF (12/13 Pages) Skyworks Solutions Inc. – 900 to 930 MHz High-Power RF Front-End Module

DATA SHEET • SKY65362-11: HIGH-POWER RF FEM
0.3 ±0.02
Ø1.50 ±0.10
Pin 1
Refer to
Special Notes
A
8.00 (P1)
B
A
4.00 (Po)
2.00 ±0.05
1.75 ±0.10
1.59 (Ko)
7° Max
Section B-B
Notes:
1. Carrier tapes must meet all requirements of Skyworks GP01-D233
procurement spec for tape and reel shipping.
2. Carrier tape shall be black conductive polystyrene.
3. Cover tape shall be transparent conductive pressure sensitive
adhesive (PSA) material with 9.30 mm width.
4. ESD-surface resistivity shall be <=1 x 10¹⁰ohms/square per
EIA, JEDEC TNR specification.
5. Po/P1 10 pitches cumulative tolerance on tape: ±0.20 mm.
6. Ao & Bo measurement point to be 0.30 mm from bottom pocket.
7. All dimensions are in millimeters.
8. Part Number: eC3-MCM0606-12-8-F3-L
(Please indicate on Purchase Order)
B
6.35 (Ao)
8° Max
Section A-A
Ø1.50 Min
Special Notes:
1. Pin 1 orientation shall be on the Top Left for the:
SKY73022-21 and -31
SKY73023-21 and -31
2. Pin 1 orientation shall be on the Top Right for all other 6 x 6 mm MCMs and RFLGAs.
Y1556
Figure 7. SKY65362-11 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
12
January 9, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202886B