SI5010 Datasheet, PDF (5/20 Pages) List of Unclassifed Manufacturers – OC-12/3, STM-4/1 SONET/SDH CLOCK AND DATA RECOVERY IC

Si5010
2. Electrical Specifications
Table 1. Recommended Operating Conditions
Parameter
Symbol
Test Condition
Min^{1 Typ} Max^{1 Unit}
Ambient Temperature
T_A
Si5010 Supply Voltage²
V_DD
–40
25
85
°C
2.375 2.5 2.625
V
Notes:
1. All minimum and maximum specifications are guaranteed and apply across the recommended operating conditions.
Typical values apply at nominal supply voltages and an operating temperature of 25 °C unless otherwise stated.
2. The Si5010 specifications are guaranteed when using the recommended application circuit (including component
tolerance) shown in "3. Typical Application Schematic" on page 9.
V
SIGNAL +
Differential V_ICM, V_OCM
I/Os SIGNAL –
V_IS
Single Ended Voltage
(SIGNAL+) – (SIGNAL–)
Differential
Voltage Swing
V_ID,V_OD
Differential Peak-to-Peak Voltage
t
Figure 1. Differential Voltage Measurement (DIN, REFCLK, DOUT, CLKOUT)
t _C-D
DOUT
CLKOUT
Figure 2. Differential Clock to Data Timing
DOUT,
CLKOUT
80%
20%
t_F
t_R
Figure 3. Differential DOUT and CLKOUT Rise/Fall Times
Rev. 1.3
5