SI8220 Datasheet, PDF (30/31 Pages) Silicon Laboratories – 0.5 AND 2.5 AMP ISODRIVERS WITH OPTO INPUT (2.5, 3.75, AND 5.0 KVRMS)

Si8220/21
DOCUMENT CHANGE LIST
Revision 0.22 to Revision 1.0
 Updated Tables 2, 3, 4, and 5.
 Updated “9. Ordering Guide” .
 Added Device Marking sections.
Revision 1.0 to Revision 1.1
 Updated Table 5 on page 10.
 Updated Table 8 on page 12.
 Removed introductory text and Figure 17.
 Changed all packages to MSL2A in
"9.Ordering Guide" on page 22.
 Updated "12.Package Outline: 16-Pin Wide Body
SOIC" on page 25.
Revision 1.1 to Revision 1.2
 Updated CMTI spec in Table 1 on page 4.
 Updated Figure 1 on page 6.
 Updated Figure 2 on page 6.
 Added Figure 3 on page 7.
 Updated Table 5 on page 10.
 Added note to Table 14 on page 22.
Revision 1.2 to Revision 1.3
 Added references to AEC-Q100 throughout.
 Changed all 60747-5-2 references to 60747-5-5.
 Added references to CQC throughout.
 Removed all references to moisture sensitivity level.
Revision 1.3 to Revision 1.4
 Updated Table 14, Ordering Part Numbers.
Added Revision D Ordering Part Numbers.
Removed all Ordering Part Numbers of previous
revisions.
Revision 1.4 to Revision 1.5
 Updated Table 2 on page 8.
Added CQC certificate numbers.
 Updated Table 3 on page 9.
Updated Erosion Depth specification.
 Updated Table 8 on page 12.
Replaced I_O with Peak Output Current I_OPK.
Added T_J specification in Table 8 on page 12.
 Updated Figure 14 on page 17.
 Updated Figure 15 on page 18.
 Updated Figure 16 on page 18.
 Updated "9.Ordering Guide" on page 22.
Updated AEC-Q100 note.
30
Rev. 1.5