LC78711E Datasheet, PDF (42/43 Pages) Sanyo Semicon Device – Graphics Display Processor

39. Register 37hex
LC78711E
• Data7: CRAY7
Data6: CRAY6
Data5: CRAY5
Data4: CRAY4
Data3: CRAY3
Data2: CRAY2
Data1: CRAY1
Data0: CRAY0
— Function: Cross cursor position setting
— Operation: Specifies the vertical direction (Y coordinate) for the cross cursor intersection point. This setting
sets the position in 2-dot units.
Note: The register 0Dhex Data 3 bit (DCRS) setting is required for execution of the cross cursor display function.
No. 5476-42/43