LC78711E Datasheet, PDF (23/43 Pages) Sanyo Semicon Device – Graphics Display Processor

LC78711E
• Data1: PH1
Data0: PH0
— Function: Color burst signal phase setting during superimpose operation
— Operation:
PH1
PH0
0
0
0
1
1
0
1
1
Phase
0°
90°
180°
270°
6. Register 07hex
• Data7: Unused (Must be set to 0.)
Data6: Unused (Must be set to 0.)
Data5: Unused (Must be set to 0.)
Data4: Unused (Must be set to 0.)
• Data3: YT3
Data2: YT2
Data1: YT1
Data0: YT0
— Function: YS (pin 46) output phase adjustment setting
— Operation: Sets the YS output timing in single 4fsc clock units. The default is a phase setting identical to that of
the video output.
7. Register 08hex
• Data7: MVMD
— Function: Moving display area setting during superimpose operation
— Operation: MVMD = 0: Only the display area moves
MVMD = 1: The area including the border area moves (only left and right motion is possible with
this setting.)
No. 5476-23/43