LC78711E Datasheet, PDF (40/43 Pages) Sanyo Semicon Device – Graphics Display Processor

36. Register 34hex
LC78711E
• Data7: WDXS7
Data6: WDXS6
Data5: WDXS5
Data4: WDXS4
Data3: WDXS3
Data2: WDXS2
Data1: WDXS1
Data0: WDXS0
— Function: Sprite display address specification
— Operation: These 8 bits plus the Data0 bit (WDXS8) of register 35hex (for a total of 9 bits), specify the bit map
horizontal direction (X coordinate). The range of valid settings is from 000hex to 12Bhex (000oct to
299oct). Values of 12Chex or larger are illegal.
37. Register 35hex
• Data7: Unused (Must be set to 0.)
Data6: Unused (Must be set to 0.)
• Data5: WDEN
— Function: Display window display setting
— Operation: Sets display window display.
WDEN = 0: The display window is not displayed.
WDEN = 1: The display window is displayed.
• Data4: WDAR
— Function: Display window display area setting
— Operation: Sets the display window display area.
WDAR = 0: Displays the inside of the display window
WDAR = 1: Displays the outside of the display window
• Data3: PAL60
— Function: PAL60 mode setting (Valid only when N/P1 and N/P2 are 0.)
— Operation: PAL60 = 0: PAL mode
PAL60 = 1: PAL60 mode
No. 5476-40/43