|
LC78711E Datasheet, PDF (22/43 Pages) Sanyo Semicon Device – Graphics Display Processor | |||
|
◁ |
4. Register 05hex
LC78711E
⢠Data7: CROS
â Function: Cross cursor display color setting
â Operation: Acquires the color set in bits CRR3:0, CRG3:0, and CRB3:0 as the cross cursor display color.
⢠Data6: CRKY
â Function: Chroma key color setting
â Operation: Acquires the color set in bits CRR3:0, CRG3:0, and CRB3:0 as the chroma key color.
⢠Data5: BGCL
â Function: Background color setting
â Operation: Acquires the color set in bits CRR3:0, CRG3:0, and CRB3:0 as the background color.
⢠Data4: Unused (Must be set to 0.)
⢠Data3: CRB3
Data2: CRB2
Data1: CRB1
Data0: CRB0
â Function: The blue color data setting
â Operation: Specifies the blue color data. There are 16 values in the range 0 to F (hexadecimal).
5. Register 06hex
⢠Data7: R/F
â Function: Color burst phase timing setting during superimpose operation
â Operation: R/F = 0: Set to the rising edge of the 4fsc clock
R/F = 1: Set to the falling edge of the 4fsc clock
⢠Data6: Unused (Must be set to 0.)
Data5: Unused (Must be set to 0.)
Data4: Unused (Must be set to 0.)
Data3: Unused (Must be set to 0.)
⢠Data2: BSTON
â Function: Color burst signal output control setting during superimpose operation
â Operation: BSTON = 0: Burst signal output is turned off
BSTON = 1: Burst signal output is turned on
No. 5476-22/43
|
▷ |