English
Language : 

LC86P6032 Datasheet, PDF (3/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time PROM
LC86P6032
• Port configuration at reset
Pin
Option settings
P0 Input : No pull-up MOS transistor
Output : N-channel open drain
Input : Pull-up MOS transistor
Output : CMOS
P1 Input : Programmable pull-up MOS
transistor
Output : N-channel open drain
Input : Programmable pull-up MOS
transistor
Output : CMOS
P7 Pull-up MOS transistor not
provided
Pull-up MOS transistor provided
LC86P6032
(Same as for the mask version)
Input mode
•The Pull-up MOS transistor is
not present during reset or several
hundred microseconds after
releasing reset. After that, the
pull-up MOS transistor is present.
(Output is OFF)
(Same as for the mask version)
(Same as for the mask version)
(Same as for the mask version)
Input mode
•The Pull-up MOS transistor is
not present during reset or several
hundred microseconds after
releasing reset. After that, the
pull-up MOS transistor is present.
LC866032/28/24/20/16/12/08
Input mode without pull-up
MOS transistor (Output is OFF)
Input mode with pull-up MOS
transistor (Output is OFF)
Input mode without pull-up
MOS transistor (Output is OFF)
Input mode without pull-up
MOS transistor (Output is OFF)
Input mode without pull-up
MOS transistor
Input mode with pull-up MOS
transistor
(2) Option
The option data is created by the option specified program “SU866000.EXE”. The created option data is linked to the
program area by the linkage loader “L866000.EXE”.
(3) ROM space
LC86P6032 and LC866000 series use 256 bytes that is addressed on 07F00H to 07FFFH in the program memory as the
option specified data area. These program memory capacity are 32512 bytes that is addressed on 0000H to 7EFFH.
7FFFH Option data
7F00H area 256 bytes
7EFFH
6FFFH
Option
Data Area
Option
Data Area
Option
Data Area
Option
Data Area
Option
Data Area
Option
Data Area
5FFFH
4FFFH
3FFFH
2FFFH
1FFFH
0000H
32K
28K
24K
20K
16K
12K
8K
LC866032
LC866028
LC866024
LC866020
LC866016
LC866012
LC866008
LC86P6032
(4) Ordering information
1.When ordering identical mask ROM and PROM devices simultaneously.
Provide an EPROM containing the target memory contents together with separate order forms for each of the mask
ROM and PROM versions.
2. When ordering a PROM device.
Provide an EPROM containing the target memory contents together with an order form.
No.4212-3/22