LC86P6032 Datasheet, PDF (13/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time PROM

LC86P6032
3. Electrical Characteristics at Ta=-30°C to +70°C, VSS=0V
Parameter
Symbol
Pins
Conditions
Ratings
unit
VDD[V] min. typ. max.
Input high
IIH(1)
•Port 1
•Output disabled
4.5 to 6.0
1
µA
current
•Port 0 without •Pull-up MOS Tr.
pull-up MOS Tr. OFF
•VIN=VDD
(including off-state
leak current of
output Tr.)
IIH(2)
•Port 7 without VIN=VDD
4.5 to 6.0
1
pull-up MOS Tr.
•Port 8
IIH(3)
RES
VIN=VDD
4.5 to 6.0
1
Input low
IIL(1)
•Port 1
•Output disabled
4.5 to 6.0 -1
current
•Port 0 without •Pull-up MOS Tr.
pull-up MOS Tr. OFF
•VIN=VSS
(including off-state
leak current of
output Tr.)
IIL(2)
•Port 7 without VIN=VSS
4.5 to 6.0 -1
pull-up MOS Tr.
•Port 8
IIL(3)
RES
VIN=VSS
4.5 to 6.0 -1
Output high VOH(1) Ports 0, 1 at
IOH=-1.0mA
4.5 to 6.0 VDD-1
V
voltage
VOH(2) CMOS output
IOH=-0.1mA
4.5 to 6.0 VDD-0.5
VOH(3) S0/T0 to S15/T15 IOH=-20mA
4.5 to 6.0 VDD-1.8
VOH(4)
•IOH=-1mA
4.5 to 6.0 VDD-1
•The current IOH at
each pin should be
between 0 and
-1mA.
VOH(5) S16 to S29
IOH=-5mA
4.5 to 6.0 VDD-1.8
VOH(6)
•IOH=-1mA
4.5 to 6.0 VDD-1
•The current IOH at
each pin should be
between 0 and
-1mA.
Output low VOL(1) Ports 0, 1
IOL=10mA
4.5 to 6.0
1.5
voltage
VOL(2)
•IOL=1.6mA
4.5 to 6.0
0.4
•When the total
current of the
ports 0, 1 is not
over 40mA.
VOL(3) Port 70
IOL=1mA
4.5 to 6.0
0.4
Pull-up MOS Rpu
•Ports 0, 1
VOH=0.9VDD
4.5 to 6.0 15
40
70 KΩ
Tr. resistance
•Port 7
continue
No.4212-13/22