LC86P6032 Datasheet, PDF (18/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time PROM

LC86P6032
Table 1. Ceramic resonator oscillation circuit recommended constants (main-clock)
Oscillation type
Supplier
Oscillator
C1
C2
12MHz ceramic resonator
Murata
CSA12.0MTZ
33pF
33pF
oscillation
CSA12.0MT
33pF
33pF
CST12.0MTW
on chip
Kyocera
KBR-12.0M
33pF
33pF
3MHz ceramic resonator
Murata
CSA3.00MG
33pF
33pF
oscillation
CST3.00MGW
on chip
Kyocera
KBR-3.0MS
47pF
47pF
* For both C1 and C2, the K rank (±10%) and SL characteristics must be used.
Table 2. Crystal oscillation circuit recommended constants (sub-clock)
Oscillation type
Supplier
Oscillator
C3
C4
32.768kHz crystal
Daishinku DT-38(1TA252E00) 18pF
18pF
oscillation
Kyocera
KF-38G-13P0200
18pF
18pF
(Notes) •Since the circuit pattern affects the oscillation frequency, place the oscillation-related parts as close
to the oscillation pins as possible with the shortest possible pattern length.
•If you use other oscillators herein, we provide no guarantee for the characteristics.
CF1
CF2
CF
C1
C2
Figure 1 Ceramic resonator oscillation
XT1
XT2
X’tal
C3
C4
Figure 2 Crystal oscillation
No.4212-18/22