LC87F06J2A Datasheet, PDF (21/32 Pages) Sanyo Semicon Device – CMOS IC FROM 192K byte, RAM 8192 byte on-chip 8-bit 1-chip Microcontroller

LC87F06J2A
Consumption Current Characteristics
at Ta = -20°C to +70°C, VSS1 = VSS2 = VSS3 = VSS4 = VSSVCO = 0V
Parameter
Normal mode
consumption
current
(Note 7-1)
Symbol
IDDOP(1)
Pins/
Remarks
Conditions
VDD[V]
min
VDD1
• FmCF=15MHz ceramic oscillation mode
=VDD2
• FsX’tal=32.768kHz by crystal oscillation
=VDD3
=VDD4
mode
• System clock set to 15MHz side
=VDDODA
=VDDVCO
• Internal RC oscillation stopped
• frequency variable RC oscillation stopped
• 1/1 frequency division ratio.
4.75 to 5.25
Specification
typ
max unit
17
38
• Slicer PLL is in running.
• Slicer RC oscillation is in running.
• Data Slicer is in running.
IDDOP(2)
• FmCF=15MHz ceramic oscillation mode
• FsX’tal=32.768kHz by crystal oscillation
mode
• System clock set to 15MHz side
4.5 to 5.5
10
24
• Internal RC oscillation stopped
mA
• frequency variable RC oscillation stopped
• 1/1 frequency division ratio.
IDDOP(3)
• FmCF=0Hz(oscillation stopped)
• FsX’tal=32.768kHz by crystal oscillation
4.5 to 5.5
0.7
4.5
mode
IDDOP(4)
• System clock set to internal RC oscillation
• frequency variable RC oscillation stopped
2.7 to 4.5
0.4
3
•1/2 frequency division ratio.
IDDOP(5)
• FmCF=0Hz(oscillation stopped)
• FsX'tal=32.768kHz by crystal oscillation
mode.
4.5 to 5.5
1.3
6
IDDOP(6)
• System clock set to 1MHz with frequency
variable RC oscillation
• Internal RC oscillation stopped
2.7 to 4.5
0.8
4.5
• 1/2 frequency division ratio.
IDDOP(7)
• FmCF=0Hz(oscillation stopped)
• FsX'tal=32.768kHz by crystal oscillation
mode.
4.5 to 5.5
40
120
IDDOP(8)
• System clock set to 32.768kHz side.
• Internal RC oscillation stopped
• frequency variable RC oscillation stopped
2.7 to 4.5
µA
18
80
• 1/2 frequency division ratio.
Note 7-1: The consumption current value includes none of the currents that flow into the output Tr and internal pull-up
resistors
Continued on next page.
No.A0432-21/32