LC78626E Datasheet, PDF (15/32 Pages) Sanyo Semicon Device – DSP for Compact Disk Players

LC78626E
(3) Switching the Phase Control Gain
Code
$B1
$B2
$B3
$B0
COMMAND
CLV phase comparator 1/2 frequency division.
CLV phase comparator 1/4 frequency division.
CLV phase comparator 1/8 frequency division.
CLV phase comparator, no frequency division.
RES = low
q
By changing the frequency division value of the first-stage frequency divider of the phase comparator it is possible to
change the phase control gain.
Phase
comparator
(4) The CLV 3-state Output
Code
$B4
$B5
COMMAND
CLV 3-state output
CLV 2-state output (traditional method)
RES = low
q
The CLV 3-state output command makes it possible to control the CLV with a single pin. However, because this will
cause the spindle gain to fall by 6 dB, it will be necessary to increase the gain on the servo side.
2-state output
3-state output
Acceleration
Deceleration
High impedance output
No. 5692-15/32