MDO4000B Datasheet, PDF (8/28 Pages) List of Unclassifed Manufacturers – Mixed Domain Oscilloscopes

Datasheet
The industry’s most complete visualization of signals provides fast insight
into the real operation of your device. A fast waveform capture rate –
greater than 50,000 waveforms per second – enables you to see glitches
and other infrequent transients within seconds, revealing the true nature of
device faults. A digital phosphor display with intensity grading shows the
history of a signal’s activity by intensifying areas of the signal that occur
more frequently, providing a visual display of just how often anomalies
occur.
The optional TPA-N-VPI adapter enables any active, 50 Ω TekVPI probe to be
connected to the spectrum analyzer.
Discover ‒ Fast waveform capture rate - over 50,000 wfm/s - maximizes the probability
of capturing elusive glitches and other infrequent events.
The TPA-N-PRE preamplifier provides 12 dB nominal gain across the 9 kHz - 6 GHz
frequency range.
Built on the award-winning MSO4000B Series
of Mixed Signal Oscilloscopes
The MDO4000B Series provides you with the same comprehensive set of
features available in the MSO4000B Mixed Signal Oscilloscope Series.
This robust set of tools will help you speed through every stage of
debugging your design - from quickly discovering an anomaly and capturing
it, to searching your waveform record for the event and analyzing its
characteristics and your device's behavior.
Discover
To debug a design problem, first you must know it exists. Every design
engineer spends time looking for problems in their design, a time-
consuming and frustrating task without the right debug tools.
Capture
Discovering a device fault is only the first step. Next, you must capture the
event of interest to identify root cause.
Accurately capturing any signal of interest begins with proper probing. Low-
capacitance probes are included with the oscilloscope, one for each analog
channel. These industry-first high-impedance passive voltage probes have
less than 4 pF of capacitive loading to minimize the effect of the probe on
your circuit's operation, offering the performance of an active probe with the
flexibility of a passive probe.
A complete set of triggers - including runt, timeout, logic, pulse width/glitch,
setup/hold violation, serial packet, and parallel data - help you quickly find
your event. With up to a 20M point record length, you can capture many
events of interest, even thousands of serial packets, in a single acquisition
for further analysis while maintaining high resolution to zoom in on fine
signal details.
From triggering on specific packet content to automatic decode in multiple
data formats, the oscilloscope provides integrated support for the industry's
broadest range of serial buses - I²C, SPI, USB, Ethernet, CAN, LIN,
FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I²S/LJ/RJ/TDM. The
ability to decode up to four serial and/or parallel buses simultaneously
means you gain insight into system-level problems quickly.
8 www.tektronix.com