MDO4000B Datasheet, PDF (25/28 Pages) List of Unclassifed Manufacturers – Mixed Domain Oscilloscopes

Mixed Domain Oscilloscopes — MDO4000B Series
DPO4EMBD
DPO4ENET
DPO4USB
DPO4PWR
DPO4LMT
DPO4VID
MDO4TRIG
Embedded Serial Triggering and Analysis Module. Enables triggering on packet-level information on I²C and SPI buses as well as
analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time-
stamp information.
Signal Inputs - I²C: Any Ch1 - Ch4, any D0 - D15; SPI: Any Ch1 - Ch4, any D0 - D15
Recommended Probing - Single ended
Ethernet Serial Triggering and Analysis Module. Enables triggering on packet-level information on 10BASE-T and 100BASE-TX ⁵
buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode
tables with time-stamp information.
Signal Inputs - Any Ch1 - Ch4, Math, Ref1 - Ref4
Recommended Probing - 10BASE-T: Single ended or differential; 100BASE-TX: Differential
USB Serial Triggering and Analysis Module. Enables triggering on packet-level content for low-speed, full-speed, and high-speed
USB serial buses. Also enables analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and
packet decode tables with time-stamp information for low-speed, full-speed, and high-speed USB serial buses. ⁶
Signal Inputs - Low-speed and Full-speed: Any Ch1 - Ch4, any D0 - D15; Low-speed, Full-speed, and High-speed: Any Ch1 - Ch4,
Math, Ref1 - Ref4
Recommended Probing - Low-speed and Full-speed: Single ended or differential; High-speed: Differential
Power Analysis Application Module. Enables quick and accurate analysis of power quality, switching loss, harmonics, safe
operating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt).
Limit and Mask Testing Application Module. Enables testing against limit templates generated from "golden" waveforms and mask
testing using custom or standard telecommunications or computer masks. ⁷
HDTV and Custom (nonstandard) Video Triggering Module.
Advanced RF Power Level Triggering Module. Enables the power level on the spectrum analyzer input to be used as a source in
the following trigger types: Pulse Width, Runt, Timeout, Logic, and Sequence.
Instrument options
Power cord and plug options
Opt. A0
North America power plug (115 V, 60 Hz)
Opt. A1
Universal Euro power plug (220 V, 50 Hz)
Opt. A2
United Kingdom power plug (240 V, 50 Hz)
Opt. A3
Australia power plug (240 V, 50 Hz)
Opt. A5
Switzerland power plug (220 V, 50 Hz)
Opt. A6
Japan power plug (100 V, 110/120 V, 60 Hz)
Opt. A10
China power plug (50 Hz)
Opt. A11
India power plug (50 Hz)
Opt. A12
Brazil power plug (60 Hz)
Opt. A99
No power cord
5 _{≥350 MHz bandwidth models are recommended for 100BASE-TX}
6 _{USB high-speed supported only on models with 1 GHz analog channel bandwidth.}
7 _{≥350 MHz bandwidth models are recommended for mask testing on telecomm standards >55 Mb/s. 1 GHz bandwidth models are recommended for mask testing on high-speed (HS) USB.}
www.tektronix.com 25