MDO4000B Datasheet, PDF (12/28 Pages) List of Unclassifed Manufacturers – Mixed Domain Oscilloscopes

Datasheet
Spectrum analyzer input
Displayed average noise level
(DANL)
Frequency range
9 kHz - 50 kHz
50 kHz - 5 MHz
5 MHz - 400 MHz
400 MHz - 3 GHz
3 GHz - 4 GHz (MDO4XX4B-6 models only)
4 GHz - 6 GHz (MDO4XX4B-6 models only)
DANL
< -116 dBm/Hz (< -120 dBm/Hz, typical)
< -130 dBm/Hz (< -134 dBm/Hz, typical)
< -146 dBm/Hz (< -148 dBm/Hz, typical)
< -147 dBm/Hz (< -149 dBm/Hz, typical)
< -148 dBm/Hz (< -152 dBm/Hz, typical)
< -140 dBm/Hz (< -144 dBm/Hz, typical)
DANL with TPA-N-PRE preamp
attached
Preamp set to "Auto", and Reference Level set to -40 dBm.
The DANL of the MDO4000B with the preamp in the Bypass state is ≤3dB higher than the DANL of the MDO4000B without the
preamp.
Frequency range
9 kHz - 50 kHz
50 kHz - 5 MHz
5 MHz - 400 MHz
400 MHz - 3 GHz
3 GHz - 4 GHz (MDO4XXB-6 models only)
4 GHz - 6 GHz (MDO4XXB-6 models only)
DANL
< -119 dBm/Hz (< -123 dBm/Hz, typical)
< -140 dBm/Hz (< -144 dBm/Hz, typical)
< -156 dBm/Hz (< -158 dBm/Hz, typical)
< -157 dBm/Hz (< -159 dBm/Hz, typical)
< -158 dBm/Hz (< -162 dBm/Hz, typical)
< -150 dBm/Hz (< -154 dBm/Hz, typical)
Spurious response
2nd and 3rd harmonic
distortion (>100 MHz)
2nd and 3rd harmonic
distortion (9 kHz to 100 MHz)
2nd order intermodulation
distortion (>100 MHz)
2nd order intermodulation
distortion (9 kHz to 100 MHz)
3rd order intermodulation
distortion: > 15 MHz
3rd order intermodulation
distortion: 9 kHz to 15 MHz
A/D spurs
A/D aliasing spurs
Specifications that only apply
to MDO4XX4-6 models
< -60 dBc (< -65 dBc, typical), with auto settings on and signals 10 dB below reference level
< -60 dBc (< -65 dBc, typical), with auto settings on, signals 10 dB below reference level, and reference level ≤ -15 dBm
< -60 dBc (< -65 dBc, typical), with auto settings on and signals 10 dB below reference level
< -60 dBc (< -65 dBc, typical), with auto settings on, signals 10 dB below reference level, and reference level ≤ -15 dBm
< -62 dBc, (<-65 dBc, typical), with auto settings on and signals 10 dB below reference level
< -62 dBc (<-65 dBc, typical), with auto settings on and signals 10 dB below reference level, and reference levels < -15 dBm
< -60 dBc (< -65 dBc, typical), with auto settings on and signals 5 dB below reference level. Excludes A/D aliasing spurs
At (5 GHz - F_in) and (8 GHz - F_in): <-55 dBc (<-60 dBc, typical), with auto settings on and signals 5 dB below reference level
IF Rejection: (All Input Frequencies except: 1.00 GHz to 1.25 GHz and 2 GHz to 2.4 GHz): < -55 dBc, typical
IF spurs at (5 GHz - F_in) for input frequencies from 1.00 GHz to 1.25 GHz: < -50 dBc, typical
IF spurs at (6.5 GHz -F_in) for input frequencies from 2 GHz to 2.4 GHz: < -50 dBc, typical
Image Rejection: < -50 dBc (for input frequencies from 5.5 GHz to 9.5 GHz)
Residual response
< -85 dBm (< -78 dBm at 2.5 GHz, 3.75 GHz, 4.0 GHz, and 5.0 GHz) with ≤ -25 dBm reference level and input terminated with
50 Ω
12 www.tektronix.com