|
BU92747XXX Datasheet, PDF (8/46 Pages) Rohm – IrDA Controller LSI built-in Ir remote control | |||
|
◁ |
BD92747XXX
Datasheet
âAbsolute Maximum Ratings
Ta=25ï°C unless otherwise stated
Parameter
Symbol
Limits
Unit
Supply voltage(Note1)
VDD
-0.3 to +2.5
V
Interface supply voltage1(Note1)
VIO1
-0.3 to +4.5
V
Interface supply voltage2(Note1)
VIO2
-0.3 to +4.5
V
Input voltage(Note1)
Power dissipation(Note2)
VBGA048W040
Power dissipation(Note3)
VQFP48C
VIN
-0.3 to VIO1, 2+0.3
V
Pd
0.57
W
Pd
0.90
W
Operating temperature range
TOPR
-40 to +85
â
Storage temperature range
TSTG
-55 to +125
â
(Note1)It applies to all pins based on the GND pin.
(Note2)Measured value with conformity substrate to SEMI (114.3mmÃ76.2mmÃ1.6mm, 4layer)
5.7mW/âdecrease over Ta=25âuse
(Noete3)Measured value with ROHM Standard Board (170.0mmÃ70.0mmÃ1.6mm, 1layer)
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider to consider circuit protection measures, such as adding a fuse, in case the IC is
operated over the absolute maximum ratings.
âRecommended Operating Ratings
Parameter
Limits
Symbol
Min.
Typ.
Supply voltage
VDD
1.62
1.8
Interface supply voltage1
VIO1
1.62
1.8
Interface supply voltage2(Note1)
VIO2
1.62
1.8
(Note1)VIO2 is connected with XIN/CLK48M, Xout, PWDN, NIRQ and RESET.
Unit
Max.
1.98
V
3.6
V
3.6
V
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»15ã»001
8/8
TSZ02201-0E4E0F100020-1-2
24. June. 2015 Rev.001
|
▷ |