|
BU92747XXX Datasheet, PDF (23/46 Pages) Rohm – IrDA Controller LSI built-in Ir remote control | |||
|
◁ |
BD92747XXX
Datasheet
âFLVâ
£: FIFO Level
The FLVâ
£ register indicates the number of data items in FIFO.
FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£ FLVâ
£
12
11
10
9
8
7
6
5
4
3
2
1
0
FLVâ
£
When data exists in FLVâ
¢, FLVâ
£ indicates the number of data bytes of the following frames that do the reception
completion in AUTO_FLV_CP mode.
âTRCRâ
¡: Transmit / Receive Control Register
TRCRâ
¡ is a register that sets each environment of the transmission and the reception.
TRCRâ
¡1 : TXE_C_CLR (TXE_EI Counter Clear)
When this bit is set to â1â, TXE_EI Counter is cleared.
After it clears, this bit is set to â0â automatically.
TRCRâ
¡2 : WRE_C_CLR (WRE_EI Counter Clear)
When this bit is set to â1â, WRE_EI Counter is cleared.
After it clears, this bit is set to â0â automatically.
âTXE_C: TXE_EI Counter
TXE_C is a register that counts the generation frequency of TXE_EI.
TXE_C8 TXE_C7 TXE_C6 TXE_C5 TXE_C4 TXE_C3 TXE_C2 TXE_C1 TXE_C0
TXE_C is effective in many windows transmit mode.
The initial value is 0.
TXE_C is initialized by TXE_C_CLR=1 or transmit / receive mode change.
TXE_C
âWRE_C: WRE_EI Counter
WRE_C is a register that counts the generation frequency of WRE_EI.
WRE _C8 WRE _C7 WRE _C6 WRE _C5 WRE _C4 WRE _C3 WRE _C2 WRE _C1 WRE _C0
WRE_C is effective in many windows transmit mode.
The initial value is 0.
WRE_C is initialized by WRE_C_CLR=1 or transmit / receive mode change.
WRE_C
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»15ã»001
23/23
TSZ02201-0E4E0F100020-1-2
24. June. 2015 Rev.001
|
▷ |