M16C65_15 Datasheet, PDF (90/115 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65 Group
5. Electrical Characteristics
Table 5.46 Electrical Characteristics (4)
V_CC1 = V_CC2 = 3 V
R5F3651RNFC, R5F3650RNFA, R5F3650RNFB, R5F3651RDFC, R5F3650RDFA, R5F3650RDFB, R5F3651TNFC,
R5F3650TNFA, R5F3650TNFB, R5F3651TDFC, R5F3650TDFA, R5F3650TDFB
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
R_fXCIN
I_CC
Feedback resistance
XCIN
Power supply current High-speed mode
In single-chip, mode,
the output pin are
open and other pins
are V_SS
40 MHz on-chip
oscillator mode
125 kHz on-chip
oscillator mode
Low-power mode
Wait mode
Stop mode
During flash
memory program
During flash
memory erase
f_(BCLK) = 32 MHz
XIN = 4 MHz (square wave),
PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 32 MHz, A/D conversion
XIN = 4 MHz (square wave),
PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
Main clock stopped
40 MHz on-chip oscillator on,
divide-by-4 (f(BCLK) = 10 MHz)
125 kHz on-chip oscillator stopped
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
f_(BCLK) = 32 MHz
In low-power mode,
FMR 22 = FMR23 = 1
on flash memory ⁽¹⁾
f_(BCLK) = 32 MHz
In low-power mode,
on RAM ⁽¹⁾
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 MHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T_opr = 25°C
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
Standard
Min. Typ. Max. ^Unit
25
MΩ
32.0
mA
32.7
mA
21.0
mA
23.0
mA
750.0
μA
300.0
μA
40.0
μA
20.0
μA
8.0
μA
4.0
μA
1.6
μA
20.0
mA
30.0
mA
Note:
1. This indicates the memory in which the program to be executed exists.
R01DS0031EJ0210 Rev.2.10
Jul 31, 2012
Page 90 of 111