M16C65_15 Datasheet, PDF (67/115 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65 Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.23 Electrical Characteristics (5)
R5F3651RNFC, R5F3650RNFA, R5F3650RNFB, R5F3651RDFC, R5F3650RDFA, R5F3650RDFB, R5F3651TNFC,
R5F3650TNFA, R5F3650TNFB, R5F3651TDFC, R5F3650TDFA, R5F3650TDFB
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20 to 85°C/−40 to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol Parameter
Measuring Condition
Standard
Min. Typ. Max. ^Unit
R_fXCIN Feedback resistance
XCIN
15
MΩ
I_CC
Power supply current High-speed mode f_(BCLK) = 32 MHz
XIN = 4 MHz (square wave), PLL multiplied by 8
32.0
mA
In single-chip, mode,
125 kHz on-chip oscillator stopped
the output pin are
open and other pins
are V_SS
f_(BCLK) = 32 MHz, A/D conversion
XIN = 4 MHz (square wave), PLL multiplied by 8
32.7
mA
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
21.0
mA
125 kHz on-chip oscillator stopped
40 MHz on-chip Main clock stopped
oscillator mode
40 MHz on-chip oscillator on,
divide-by-4 (f(BCLK) = 10 MHz)
23.0
mA
125 kHz on-chip oscillator stopped
125 kHz on-chip Main clock stopped
oscillator mode
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
750.0
μA
FMR22 = 1 (slow read mode)
Low-power mode
f_(BCLK) = 32 kHz
In low-power mode
FMR22 = FMR23 = 1
250.0
μA
on flash memory ⁽¹⁾
f_(BCLK) = 32 kHz
In low-power mode
45.0
μA
on RAM ⁽¹⁾
Wait mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
21.0
μA
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
11.0
μA
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
6.0
μA
Peripheral clock operating
T_opr = 25°C
Stop mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T_opr = 25°C
1.7
μA
During flash
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
memory program _{VCC1 = 5.0 V}
20.0
mA
During flash
memory erase
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 5.0 V
30.0
mA
Note:
1. This indicates the memory in which the program to be executed exists.
R01DS0031EJ0210 Rev.2.10
Jul 31, 2012
Page 67 of 111