4507 Datasheet, PDF (89/115 Pages) Renesas Technology Corp – SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

4507 Group
Skip condition
Datailed description
–
–
–
–
–
–
–
–
–
–
–
Continuous
description
–
(Y) = 0
(Y) = 15
–
–
(Y) = 15
(Y) = 0
–
– Transfers the contents of register B to register A.
– Transfers the contents of register A to register B.
– Transfers the contents of register Y to register A.
– Transfers the contents of register A to register Y.
– Transfers the contents of register B to the high-order 4 bits (E3–E0) of register E, and the contents of regis-
ter A to the low-order 4 bits (E3–E0) of register E.
– Transfers the high-order 4 bits (E7–E4) of register E to register B, and low-order 4 bits of register E to regis-
ter A.
– Transfers the contents of the low-order 3 bits (A2–A0) of register A to register D.
– Transfers the contents of register D to the low-order 3 bits (A2–A0) of register A.
– Transfers the contents of register Z to the low-order 2 bits (A1, A0) of register A.
– Transfers the contents of register X to register A.
– Transfers the contents of stack pointer (SP) to the low-order 3 bits (A2–A0) of register A.
– Loads the value x in the immediate field to register X, and the value y in the immediate field to register Y.
When the LXY instructions are continuously coded and executed, only the first LXY instruction is executed
and other LXY instructions coded continuously are skipped.
– Loads the value z in the immediate field to register Z.
– Adds 1 to the contents of register Y. As a result of addition, when the contents of register Y is 0, the next in-
struction is skipped. When the contents of register Y is not 0, the next instruction is executed.
– Subtracts 1 from the contents of register Y. As a result of subtraction, when the contents of register Y is 15,
the next instruction is skipped. When the contents of register Y is not 15, the next instruction is executed.
– After transferring the contents of M(DP) to register A, an exclusive OR operation is performed between reg-
ister X and the value j in the immediate field, and stores the result in register X.
– After exchanging the contents of M(DP) with the contents of register A, an exclusive OR operation is per-
formed between register X and the value j in the immediate field, and stores the result in register X.
– After exchanging the contents of M(DP) with the contents of register A, an exclusive OR operation is per-
formed between register X and the value j in the immediate field, and stores the result in register X.
Subtracts 1 from the contents of register Y. As a result of subtraction, when the contents of register Y is 15,
the next instruction is skipped. When the contents of register Y is not 15, the next instruction is executed.
– After exchanging the contents of M(DP) with the contents of register A, an exclusive OR operation is per-
formed between register X and the value j in the immediate field, and stores the result in register X.
Adds 1 to the contents of register Y. As a result of addition, when the contents of register Y is 0, the next in-
struction is skipped. when the contents of register Y is not 0, the next instruction is executed.
– After transferring the contents of register A to M(DP), an exclusive OR operation is performed between reg-
ister X and the value j in the immediate field, and stores the result in register X.
Rev.3.01 2005.02.04 page 89 of 111
REJ03B0107-0301