4507 Datasheet, PDF (107/115 Pages) Renesas Technology Corp – SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

4507 Group
A/D converter recommended operating conditions
(Comparator mode included, Ta = –20 °C to 85 °C, unless otherwise noted)
Symbol
Parameter
VDD
Supply voltage
VIA
f(XIN)
Analog input voltage
Oscillation frequency
Conditions
Ta = 25 °C
Ta = –20 °C to 85 °C
VDD = 2.7 V to 5.5 V
High-speed mode
Middle-speed mode
Low-speed mode
Default mode
Limits
Unit
Min.
Typ.
Max.
2.7
5.5
V
3.0
5.5
0
VDD+2LSB V
0.1
MHz
0.2
0.4
0.8
A/D converter characteristcs
(Ta = –20 °C to 85 °C, unless otherwise noted)
Symbol
Parameter
Test conditions
–
–
–
V0T
VFST
IADD
TCONV
–
–
–
Resolution
Linearity error
Differential non-linearity error
Zero transition voltage
Full-scale transition voltage
A/D operating current (Note 1)
A/D conversion time
Comparator resolution
Comparator error (Note 2)
Comparator comparison time
Ta = 25 °C, VDD = 2.7 V to 5.5 V
Ta = –25 °C to 85 °C, VDD = 3.0 V to 5.5 V
Ta = 25 °C, VDD = 2.7 V to 5.5 V
Ta = –25 °C to 85 °C, VDD = 3.0 V to 5.5 V
VDD = 5.12 V
VDD = 3.072 V
VDD = 5.12 V
VDD = 3.072 V
VDD = 5.0 V
VDD = 3.0 V
f(XIN) = 4.0 MHz High-speed mode
Middle-speed mode
Low-speed mode
Default mode
VDD = 5.12 V
VDD = 3.072 V
f(XIN) = 4.0 MHz
High-speed mode
Middle-speed mode
Low-speed mode
Default mode
Min.
10
3
5115
3063
Limits
Typ.
20
9
5125
3069
0.3
0.1
Unit
Max.
10
bits
±2.0 LSB
±0.9 LSB
30
mV
15
5135 mV
3075
0.9
mA
0.3
46.5
µs
93.0
186
372
8
bits
±20
mV
±15
6.0
µs
12
24
48
Notes 1: When the A/D converter is used, the IADD is included to IDD.
2: As for the error from the logic value in the comparator mode, when the contents of the comparator register is n, the logic value of the comparison
voltage Vref which is generated by the built-in DA converter can be obtained by the following formula.
Logic value of comparison voltage Vref
VDD
Vref = ₂₅₆ ✕ n
n = Value of register AD (n = 0 to 255)
Rev.3.01 2005.02.04 page 107 of 111
REJ03B0107-0301