M32C8B_09 Datasheet, PDF (54/69 Pages) Renesas Technology Corp – RENESAS MCU

M32C/8B Group
5. Electrical Characteristics
VCC1 = VCC2 = 3.3 V
Table 5.30
Electrical Characteristics (2/3)
(VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, Topr = -20 to 85°C, f(CPU) = 24 MHz unless
otherwise specified)
Symbol
Parameter
Condition
IIH
Input high P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
“H” current P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7⁽¹⁾, XIN, RESET, CNVSS,
BYTE
IIL
Input low P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
“L” current P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7⁽¹⁾, XIN, RESET, CNVSS,
BYTE
RPULLUP Pull-up
resistance
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7,P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7⁽¹⁾
RfXIN
Feedback XIN
resistance
RfXCIN Feedback XCIN
resistance
VI = 3 V
VI = 0V
VI=0V
Standard
Unit
Min. Typ. Max.
4.0 μA
-4.0 μA
50
100 500 kΩ
3.0
MΩ
25
MΩ
VRAM
RAM data In stop mode
retention
voltage
2.0
V
NOTE:
1. P11 to P15 are provided in the 144-pin package only.
REJ03B0242-0100 Rev.1.00 Nov 01, 2009
Page 54 of 67