PIC480.241C Datasheet, PDF (9/21 Pages) PULS GmbH – 24V, 20A, SINGLE PHASE INPUT

PIANO-Series
PRELIMINARY
PIC480.241C
24V, 20A, SINGLE PHASE INPUT
11. FUNCTIONAL DIAGRAM
Fig. 11-1 Functional diagram
L
Input Fuse
N
Input Filter
Input Rectifier
PFC
Converter
Power
Converter
Output
Filter
Inrush Current Limiter
DC-ok
Relay
Temper-
ature
Shut-
down
Output
Over-
Voltage
Protection
Output
Voltage
Regulator
+
+
-
-
DC-ok
Contact
DC-ok
LED
V_OUT
12. TERMINALS AND WIRING
The terminals are IP20 finger safe constructed and suitable for field- and factory wiring.
Type
Solid wire
Stranded wire
American Wire Gauge
Maximal wire diameter
Wire stripping length
Screwdriver
Recommended tightening torque
Input and output
Screw terminals
max. 6mm²
max. 4mm²
AWG20-10
2.8mm (including ferrules)
7mm / 0.28inch
3.5mm slotted or cross-head No 2
1Nm, 9lb.in
DC-OK-Signal
Push-in terminals
max. 1.5mm²
max. 1.5mm²
AWG28-16
1.6mm (including ferrules)
7mm / 0.28inch
not required
not applicable
Instructions:
a) Use appropriate copper cables that are designed for minimum operating temperatures of:
75°C for ambient up to 55°C and
90°C for ambient up to 70°C minimum.
b) Follow national installation codes and installation regulations!
c) Ensure that all strands of a stranded wire enter the terminal connection!
d) Do not use the unit without PE connection.
e) Unused terminal compartments should be securely tightened.
f) Ferrules are allowed.
Jun. 2016 / Rev. 0.2 DS-PIC480.241C-EN
All parameters are specified at 24V, 20A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
9/21