PIC480.241C Datasheet, PDF (12/21 Pages) PULS GmbH – 24V, 20A, SINGLE PHASE INPUT

PIANO-Series
PRELIMINARY
PIC480.241C
24V, 20A, SINGLE PHASE INPUT
15. ENVIRONMENT
Operational temperature^*) -10°C to +70°C (14°F to 158°F)
reduce output power according Fig. 15-1
Storage temperature
-40°C to +85°C (-40°F to 185°F)
for storage and transportation
Output de-rating
8W/°C
55°C to 70°C (131°F to 158°F)
Humidity^**)
5 to 95% r.h.
IEC 60068-2-30
Vibration sinusoidal
2-17.8Hz: ±1.6mm; 17.8-500Hz: 2g^***)
2 hours / axis^***)
IEC 60068-2-6
Shock
30g 6ms, 20g 11ms^***)
IEC 60068-2-27
3 bumps / direction, 18 bumps in total
Altitude
0 to 2000m (0 to 6 560ft)
without any restrictions
2000 to 6000m (6 560 to 20 000ft)
reduce output power or ambient temperature,
see Fig. 15-2
IEC 62103, EN 50178, overvoltage category II
Altitude de-rating
30W/1000m or 5°C/1000m
> 2000m (6500ft), see Fig. 15-2
Over-voltage category
III
IEC 62103, EN 50178, altitudes up to 2000m
II
altitudes from 2000m to 6000m
Degree of pollution
2
IEC 62103, EN 50178, not conductive
LABS compatibility
The unit does not release any silicone or other LABS-critical substances and is suitable for
use in paint shops.
*) Operational temperature is the same as the ambient or surrounding temperature and is defined as the air temperature 2cm below the
unit.
**) Do not energize while condensation is present
***) Tested on a DIN-Rail with a thickness of 1.3mm.
Fig. 15-1 Output current vs. ambient temp.
Allowable Output Current at 24V
20A
15A
10A
5A
Ambient Temperature
0
-10 0
+20 +40 +55 +70°C
Fig. 15-2 Output current vs. altitude
Allowed Output
Current at 24V
24A
20A
C
B
16A
A
12A
8A
4A
0
0
A... Tamb < 55°C
B... Tamb < 45°C
C... Tamb < 35°C
2000
4000
Altitude
6000m
Jun. 2016 / Rev. 0.2 DS-PIC480.241C-EN
All parameters are specified at 24V, 20A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
12/21