TDA8002C Datasheet, PDF (21/28 Pages) NXP Semiconductors – IC card interface

Philips Semiconductors
IC card interface
Product specification
TDA8002C
Notes
1. It may be necessary to connect capacitors from XTAL1 and XTAL2 to ground depending on the choice of crystal or
resonator.
2. When the oscillator is stopped in mode 1, XTAL1 is set to HIGH.
3.
4.
The transition time and duty cycle definitions are shown in Fig.15;
CLKOUT transition time and duty cycle do not need to be tested.
δ
=
t--₁^----t+^--1---t--₂^-
5. PRES and CMDVCC are active LOW; RSTIN, PRES and CS are active HIGH.
handbook, full pagewidth
tr
90%
tf
90%
10%
10%
t1
t2
VOH
1/2 VCC
VOL
MGE741
Fig.15 Definition of transition times.
1999 Oct 12
21