AMIS-30623 Datasheet, PDF (60/65 Pages) AMI SEMICONDUCTOR – LIN Microstepping Motordriver

AMIS-30623
17.0 Resistance to Electrical and Electromagnetic Disturbances
17.1 Electrostatic Discharges
Table 35: Absolute Maximum Ratings
Parameter
Min.
Vesd¹
Electrostatic discharge voltage on LIN pin
-4
Electrostatic discharge voltage on other pins
-2
Note:
(1) Human body model (100 pF via 1.5 kΩ, according to MIL std. 883E, method 3015.7)
Max.
+4
+2
Unit
kV
kV
17.2 Electrical Transient Conduction Along Supply Lines
Test pulses are applied to the power supply wires of the equipment implementing the AMIS-30623 (see application schematic),
according to ISO 7637-1 document. Operating Classes are defined in ISO 7637-2.
Table 36: Test Pulses and Test Levels According to ISO 7637-1
Pulse
Amplitude
Rise Time Pulse Duration
#1
-100V
≤ 1µs
2ms
#2a
+100V
≤ 1µs
50µs
#3a
-150V (from +13.5V)
5ns
100ns (burst)
#3b
+100V (from +13.5V)
5ns
100ns (burst)
#5b (load dump) +21.5V (from +13.5V)
≤ 10ms
400ms
Rs
10Ω
2Ω
50Ω
50Ω
≤ 1Ω
Operating Class
C
B
A
A
C
17.3 EMC
Bulk current injection (BCI), according to ISO 11452-4. Operating Classes are defined in ISO 7637-2.
Table 37: Bulk Current Injection Operation Classes
Current
Operating Class
60mA envelope
A
100mA envelope
B
200mA envelope
C
17.4 Power Supply Micro-interruptions
According to ISO 16750-2
Table 38: Immunity to Power Supply Micro-interruptions
Test
Operating Class
10µs micro-interruptions
A
100µs micro-interruptions
B
5ms micro-interruptions
B
50ms micro-interruptions
C
300ms micro-interruptions
C
Rev. 4 | Page 60 of 65 | www.onsemi.com