AMIS-49587_P2 Datasheet, PDF (41/55 Pages) ON Semiconductor – Power Line Carrier Modem

AMIS--49587
Table 42. NON CHANGEABLE PARAMETERS AFTER AMIS 49587 IS SET
Field
R_CONF_TX_DATA_PRE_SLOT_SEL
R_CONF→MODE
R_CONF→BAUDRATE
R_CONF→MAINS_FREQ
Length
1 bit (b7)
3 bits (b5 to b3)
2 bits (b2,b1)
1 bit (b0)
Value
x
xxx
xx
x
Description
No action
No action
No action
No action
Table 43. WriteConfig ERROR CODES
Error Identifier
ERR_UNAVAILABLE_MODE
ERR_ILLEGAL_DATA_COMMAND
ERR_ILLEGAL_LOCAL_MAC_ADR
ERR_ILLEGAL_INITIATOR_MAC_ADR
ERR_UNAVAILABLE_COMMAND
Error_Code
21h
22h
23h
24h
25h
7.3.5 AccessDB_Request
External CPU
AMIS49587
Command
Interpreter
AccessDB_Request (0x41)
[Data fields can’t be changed now]
AccessDB_Error (0x43)
[Data fields can be changed]
AccessDB_Confirm (0x42)
Figure 33. Sequence Diagram for AccessDB_Request
<STX> 0x07 + length of
data (Length)
0x41 (AccessDB_Request)
Data Field Identifier (Table44)
Data
CHK
Note that although the name of the AccessDB_Request command suggests only write operations are possible, there are
subcommands to read from the data base.
Each AccessDB_Request command is answered by the MODEM with either a AccessDB_Confirm or AccessDB_Error
frame.
For better readability, the AccessDB_Confirm frames and explanation are listed here and not grouped into a separate
chapter.
http://onsemi.com
41