TCC-206 Datasheet, PDF (4/33 Pages) ON Semiconductor – Six-Output PTIC Control IC

TCC−206
Table 3. RECOMENDED OPERATING CONDITIONS
Rating
Symbol
Parameter
Min
Typ
Max
Unit
T_{AMB_OP}
T_{J_OP}
AVDD
Operating Ambient Temperature
Operating Junction Temperature
Analog Supply Voltage
−30
−
+85
°C
−30
−
+125
°C
2.3
−
5.5
V
VIO
IO Reference Supply Voltage
1.62
−
1.98
V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
Table 4. DC CHARACTERISTICS (T_A = −30 to +85°C; V_OUTX = 15 V for each output; 2.3 V<AVDD< 5.5 V; V_IO = 1.8 V; R_LOAD =
equivalent series load of 5.6 kW and 2.7 nF; C_HV = 22 nF; L_BOOST = 15 mH; TRIG pin grounded; unless otherwise specified)
Symbol
Parameter
Min
Typ
Max Unit
Comment
SHUTDOWN MODE
I_AVDD
I_{L_BOOST}
I_BATT
I_VIO
I_CLK
I_DATA
ACTIVE MODE
AVDD Supply Current
L_BOOST Leakage
Battery Current
VIO Supply Current
CLK Leakage
DATA Leakage
−
−
1.5
mA
−
−
1.5
−
−
2.5
−1
−
1
−1
−
1
−1
−
1
VIO Supply is Low
I_BATT
Average battery current, 3 outputs act-
−
ively switching 16 V for 1205 ms to 2 V
for 1705 ms to 8 V for 1705 ms and 3
outputs are @ 16 V steady state
1,760
2,350
mA
At VHV = 20 V
AVDD = 3.3 V
I_{BATT_SS0}
Average battery current, 6 outputs @
−
800
1,130
0 V steady state
At VHV = 20 V
AVDD = 3.3 V
I_{BAT_SS2}
Average battery current, 6 outputs @
−
850
1,200
mA
2 V steady state
At VHV = 20 V
AVDD = 3.3 V
I_{BATT_SS16}
Average battery current, 6 outputs @
16 V steady state
−
1,190
1,560
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST}
Average inductor current, 3 outputs ac-
−
tively switching 16 V for 1205 ms to 2 V
for 1705 ms to 8 V for 1705 ms and 3
outputs are @ 16 V steady state
1,480
2,050
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST_SS0} Average inductor current, 6 outputs @
−
0 V steady state
500
790
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST_SS2} Average inductor current, 6 outputs @
−
2 V steady state
560
850
At VHV = 20 V
AVDD = 3.3 V
I_{L_BOOST_SS16} Average inductor current, 6 outputs @
−
16 V steady state
930
1,270
At VHV = 20 V
AVDD = 3.3 V
I_{VIO_INACT}
I_{VIO_ACTIVE}
VIO average inactive current
VIO average active current
−
−
3
−
−
250
VIO is high, no bus activity
VIO = 1.8 V, master sending
data at 26 MHz
V_VREG
1.7
−
1.9
V
No external load allowed
www.onsemi.com
4