E32DC200F Datasheet, PDF (59/67 Pages) Omron Electronics LLC – These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces and positioning.

E32-A09 R25
E32-A09H R35
9
Sensing surface (aluminum)
Lends 5 dia.
Flexible Break-resistant Fluororesin coating R@ Standard
Cutting free (Cutter provided)
E32-A09H2 R25
Sensing surface 9
Lends 5 dia.
(SUS303)
Two, 3.2 dia. mounting holes
with two, 6 dia. countersinks
on both sides
Two, 2.8 dia.
flexible tubes
(SUS304)
24 _8.9
4 dia. 2.2 dia.
20
8.9
12 7
23
Two, 2.2 dia.
Two, 3.2 dia. mounting holes with
two, 6 dia. countersinks on one side
2,000
12 7
*
5
30
2,000
28(B)
Note: The maximum allowable temperatures for sections A and B
are 300°C and 110°C, respectively. The section inserted into
the Amplifier Unit (indicated by *), however, must stay within
the Amplifier Unit's operating temperature range.
Wafer-mapping Models
E32-A03
0.4
Two, R1.6
20.5
1.8
4.3 17.6 11
3 dia.
3.4
R1.6
3.2
2
10
2,000
Stamp
3.2 _{(1 dia.)}
E39-F9: Included
(brass/nickel plating)
E39-L83 Mounting Bracket
(SUS) (provided)
Sensing surface: 2 dia.
Note: Use the stamped surface and its opposing surface as installation (refer-
ence) surfaces.
E32-A04 R10
2 dia. (SUS303)
E39-F9: Included
1 dia.
2
2
4
20.5
Stamp (1 dia.)
2,000
Sensing surface: 1.2 dia.
2
Note: Use the stamped surface and its opposing surface as installation (refer-
ence) surfaces.
E32-A03-1 R10
3 dia.
1 dia.
4.5
10
3
3.5 ^{6.5 3}
12.5
18.5
Stamp (1 dia.)
Mounting holes
Two, 3.4 dia
E39-F9: Included
Sensing surface
2 dia.
24.5
13
2,000
(brass/nickel plating)
Note 1. Use the stamped surface and its opposing surface as installation (ref-
erence) surfaces.
2. Set of two symmetrical parts.
E32-A04-1 R10
2
installation
(reference)
surfaces
2
2 dia.
9
1.2
2.5
3.5
10
4 ₁₇
21
Sensing surface
1.2 dia.
2
1 dia.
2-M2
E39-F9: Included
2,000
(SUS303)
Note: Set of two symmetrical parts.
Mounting hole dimensions (recommended)
F
<Screw-mounting Model>
(Unit:mm)
Outer diameter of
fiber unit
M3
M4
M6
M14
F dimensions
3
+0.5
0
dia.
4 +0.5
0
dia.
6 +0.5
0
dia.
14
+1
0
dia.
Example: Head size of E32-TC200 is M4. Open the mounting holes with 4 to 4.5 dia.
<Cylindrical Model>
(Unit:mm)
Outer diameter of
fiber unit
F dimensions
1 dia. 1.5 dia. 2 dia. 3 dia.
1.2^+00.2dia.
1.7
+0.2
0
dia.
2.2^+00.2dia.
3.2
+0.2
0
dia.
Outer diameter of
fiber unit
3.5 dia.
4 dia.
5 dia.
6 dia.
F dimensions
4 +0.5
0
dia.
4.5^+00.5dia.
5.5
+0.5
0
dia.
6.5
+0.5
0
dia.
Example: Head size of E32-T22 is 2 dia.. Open the mounting holes with 2.2 to 2.4 dia.
Minimum bending radius
unbendable
B
Sensing
head
Minimum bending radius
A
Flexible
Break-resistant
Fluororesin coating R@ Standard
(Unit:mm)
Type
A
Minimum bending
radius
B
unbendable
(except E32-C11N, E32-C31N
1
0
and E32-CC200)
(E32-C11N, E32-C31N,
4
0
E32-CC200R)
R4
4
10
R10
10
10
R25
25
10
R30
30
10
R35
35
10
R40
40
10
59