E32DC200F Datasheet, PDF (58/67 Pages) Omron Electronics LLC – These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces and positioning.

Fiber Units with Reflective Sensors
Application-corresponding Fiber Units
Liquid-level Detection Models
E32-A01 R4
(ABS)
Two, 2.2 dia.
(PBT)
(PMMA)
20
4.2
27
31.2
Receiver
5,000
Flexible Break-resistant Fluororesin coating R@ Standard
Cutting free (Cutter provided)
E32-A02 R4
(ABS)
17.8
(ABS)
14.5
4.5
3.3
1.7
Sensing surface
(2 × 11)(PMMA)
7
3
12
4.5
27
31.5
Two, 2.2 dia.
5,000
19.9 _{Optical axis}
21.5
Optical axis
E32-D82F1 R40
E32-D82F2 R40
7.2
Emitter
6 dia. (Fluororesin)
Fiber connector 9 dia.
(brass/nickel plating)
8 dia.
Two, 2.2 dia. *2
Note: The maximum allowable temperatures
for sections A and B are 200°C and
85°C, respectively.
To the Amplifier Unit
Length of unbendable
section: 150 (350) *1
2,000
27
42
2,000
A
B
1,500 mm from the tip
*1.( ): E32-D82F2
*2.The 2-m section of optical fiber on the Amplifier-unit side is plastic and therefore allows free cutting.
Models for Glass-substrate Alignment/Mapping
E32-A08 R25
E32-A07E1 R25
E32-A07E2 R25
3.8 10.7 6.5 _(ABS)
Two, 2.2 dia. *1
14 12
Sensing surface
1.1
24.5
Two, 3.2 dia. mounting holes
with two, 6 dia. countersinks *2
2,000
E32-L66 R25
(SUS303)
Two, 3.2 dia. mounting holes with
6 dia. Countersinks on one side
18
Sensing 7
1 ^surface
3.3
21.7
2,000
A
2.2 dia.
5 _{4 dia.}
*
25(B)
5
5.5
*1 The E32-A07E1/E32-A07E2 has a reception fiber and an emission
fiber. Use the fiber with a model display tube (fiber with blue dotted
line) as light emitting side.
*2 E32-A08 : Countersinks on one side
E32-A07E1/E32-A07E2 : Countersinks on both sides
36
Two, 2.8 dia. flexible tubes (SUS304)
Note: The maximum allowable temperatures for sections A and B are
300°C and 110°C, respectively. The section inserted into the Am-
plifier Unit (indicated by *), however, must stay within the Amplifier
Unit's operating temperature range.
E32-A08H2 R25
Mounting holes Two, 3.4 dia.
Two, 6.3 dia. countersinks
5
18
1.5
(5)
4 dia. 8.6
Sleeve (Aluminum)
4 dia.
Note: The maximum allowable temperatures for sections A
and B are 300°C and 110°C, respectively.
2-M3
2.2 dia.
6.5±0.1
Sensing surface
4
10.7
6.5
(SUS303)
Flexible tube:
Two, 2.9 dia
(stainless steel)
Mounting holes
26
3,000
A
30(B)
58